1 / 2
Brennenstuhl Bremounta 90° Power Strip Mount — zdjęcie 1
1 / 2

Brennenstuhl Bremounta 90° Power Strip Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attaches Brennenstuhl Bremounta power strips to flat surfaces at a 90° angle.

Ocena
5 / 5
Polubienia
6
Pobrania
43
Wydruki
1
Wyświetlenia
235
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Every time I vacuumed my bedroom, I was annoyed by the power strips lying on the floor, so I made this holder to attach them to the bottom of the nightstands.

The bracket can be screwed onto any flat surface and mounts the power strip at a 90° angle. The excess cable can be rolled up on the brackets and secured with zip ties. Compatible with Brennenstuhl Bremounta power strips.

Attention: If you slice the file yourself, don't forget to add a pause at 11.80mm, as the nuts cannot be inserted later.
 

Materials you'll need

  • 4 Pcs. 3,5x25mm Countersunk Wood Screw
  • 4 Pcs. M4x40mm Bolts
  • 4 Pcs. M4 Nut
  • Zip Ties

Tagi