Roman cup - Römerbecher
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.38 – €5.35 net (excluding VAT)
For file: bowl_0.2mm_PLA_MK3S_5h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.87 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 5.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Decoration bowl for a table, roman-cup, bowl.
- Rating
- 4 / 5
- Likes
- 0
- Downloads
- 31
- Makes
- 1
- Views
- 106
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EN:
This “Roman cup” was created as a “spin-off” of the rose ball, planter and spherical vase.
To avoid the quality problems at the base of the sphere, the project was designed for 2 parts.
For details see:
https://www.printables.com/model/887687-garden-ball-rose-ball-rosenkugel-gartenkugel ,
https://www.printables.com/model/891379-planter-blumentopf ,
https://www.printables.com/model/892205-spherical-vase ,
The parts are quickly assembled with a little glue. If you want to fill the part with liquid, don't forget to seal it with “XTC” or “Diamant Dichtol”, for example...
Material: PLA
Layers: 0,2mm
Supports: yes, were partially blocked in the .3mf file.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
DE:
Als "Spin-off" von Rosenkugel, Planter und Kugelvase ergab sich dieser "Römerbecher".
Um die Qualitätsprobleme an der Basis der Kugel zu vermeiden, wurde das Projekt für 2 Teile konzipiert.
Für details siehe
https://www.printables.com/model/887687-garden-ball-rose-ball-rosenkugel-gartenkugel .
https://www.printables.com/model/891379-planter-blumentopf ,
https://www.printables.com/model/892205-spherical-vase
Mit ein bißchen Klebstoff sind die Teile schnell zusammengesetzt. Vergessen Sie nicht, wenn Sie das Teil mit Flüssigkeit befüllen wollen, z.B. mit "XTC" oder "Diamant Dichtol" abzudichten...
Material: PLA
Schichten: 0,2mm
Stützen: ja, wurden in der .3mf-Datei zT blockiert.