Bottle Cap Opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bottle cap to remove bottle caps.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 60
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
It's a bottle cap that removes bottle caps. Prints with no supports. Add to 10mm x 3mm magnets to stick it to the fridge. This design requires a bottle opener insert kit which is available at Amazon.
https://www.amazon.com/Bottle-Opener-Insert-Stainless-Screwdriver/dp/B09T6HX8R5/ref=sr_1_2_sspa?sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
(There are many vendors. Just search for Bottle Cap Opener Insert. The opening is 40mm or 1.57")
The openers I made are printed in white PLA, sprayed with body filler primer and then spray painted with the final color…but you could skip the painting.
They work great. They are the perfect size for an adult hand and the cap just seems to fall into your fingers.