Bosch FSN guide rail amazon clamp adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter for the standard bosch guide rail and the amazon basic clamps.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 69
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
No additional parts needed. Just use the screw and nut from the amazon clamp.
----------
Disclaimer:
Keep in mind that this part is not for heavy duty. It's suprisingly stronger than i expected, nonetheless can break quite easy if you bend the thin part too much.
Please also note that there has to be a certain thickness if you want to clamp something (or just use a piece of wood as a spacer - should not be a problem).
Infill:
I would suggest to print at least the first 50% of the print with 100% infill. The upper part is supported by the metal of the clamp and should be okay with the standard.
Position:
It is designed to print upright, with the opening cross on top. No supports needed. In my case there was no raft nessesary.
Material:
I recommend to print in PETG or a stiffer material.
The 3mf-File has the positioning and the 100% infill in half of the part already set.