Bosch FSN guide rail amazon clamp adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the standard bosch guide rail and the amazon basic clamps.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
No additional parts needed. Just use the screw and nut from the amazon clamp.
----------
Disclaimer:
Keep in mind that this part is not for heavy duty. It's suprisingly stronger than i expected, nonetheless can break quite easy if you bend the thin part too much.
Please also note that there has to be a certain thickness if you want to clamp something (or just use a piece of wood as a spacer - should not be a problem).
Infill:
I would suggest to print at least the first 50% of the print with 100% infill. The upper part is supported by the metal of the clamp and should be okay with the standard.
Position:
It is designed to print upright, with the opening cross on top. No supports needed. In my case there was no raft nessesary.
Material:
I recommend to print in PETG or a stiffer material.
The 3mf-File has the positioning and the 100% infill in half of the part already set.