M35x1 to T2 adapter (mod 1)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.04 – €1.28 net (excluding VAT)
For file: Adapter_M35x1_int_T2_ext_0.4n_0.12mm_PETG_MK3.5_1h8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.14 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
M35x1 to T2 adapter (mod 1)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
M35x1 to T2 adapter (mod 1)
I use this part on a MEADE ETX70.
The thread should be printed with a layer height of 0.12 mm or less for good rolling.
Material: PETG
Can be printed without support material.
With a quality filament (Prusament PETG) and good printer maintenance, you should have no problem printing the fine pitch thread.