1 / 4
G-scale / Gauge 1 "Sugar" 4-Axle Car
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a little 3D-printable sugar flatcar I made, based on both the HLW and LGB equivalents. Uses Kadee 830 couplers.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 216
- Makes
- 3
- Views
- 1,069
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Share Alike
THIS IS MY FIRST MODEL & IT SHOWS
Print at your own risk! I'll put out an updated version eventually, but this is not as good as it should be!
This is a little 3D-printable sugar flatcar I made, based on both the HLW and LGB equivalents. This is designed to use Kadee 830 or 930 couplers. To assemble, put the wheels into the sides and slot the sides into the frame. (Glue may be needed) You can slot on either a low-side truck body or 6 posts. Use LGB spoked wheels (Or equivalent - 30mm)