1 / 3
MagSafe to DualSense adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MagSafe adapter for PS5 controller, DualSense
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- GNU General Public License v3.0
I bought a cheap phone holder for DualSense controller from AliExpress, but hated the springy phone holder. I had most of these parts lying around. The model is pretty simple.
Printing settings
These don't matter that much. It should be noted, that this printed part adds quite a lot to the weight. I recommend the following settings:
- Material: PLA, anything else will do as well
- Walls: >3
- Infill: >15%
- Print orientation: On its side
Bill of Materials (BOM)
| Part | Link to part |
| DualSense phone clamp | AliExpress |
| M3 heat inserts | Any generic length ones will do, length doesn't matter in this case. I had M3x10x4,2 |
| ¼"-20 heat insert | I used ¼"-20x12,7x8 - AliExpress |
| ¼"-20 male-to-male adapter | AliExpress |
| MagSafe magnetic puck | AliExpress |