Smartphone Stand tripod Stativ Modular Mounting System
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.36 – €6.55 net (excluding VAT)
For file: smartphone_stand_gcode.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.95 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 5.83 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a very practical smartphone stand / tripod, wich is perfect in many usecases.
- Rating
- 4.8 / 5
- Likes
- 105
- Downloads
- 812
- Makes
- 12
- Views
- 5,055
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
This is a very practical smartphone stand / tripod, wich is perfect in many usecases.
For assembly, you will need:
1x M5 65mm bolt
2x M5 25mm bolt
3x M5 nut
Feel free to share your own experiences with the community!
This smartphone stand is part of the Modular Mounting System by yyh1002 found on Thingiverse:
https://www.thingiverse.com/thing:2194278
Print instructions
I printed this model in an ABS filament by Sunlu.
Of course you can also use PLA here, I just chose ABS because of it's little bit better durability.
Print results will be perfect with the 0.2mm SPEED setting in PrusaSlicer. I printed the foot of the stand in a 0.3mm Layer Height, but I wouldn't recommend it, because it resulted in some big overhangs.
The original model on Thingiverse contains STL files for the nuts and bolts as well.
I tried printing them in different print settings, and it kind of worked.
But when it came to assembly, it turned out that the printed bolts don't have that kind of strength that the metal ones have, so I was not able to really tighten those screwed spots.
So, better buy them in your local hardware store. The results will be much much better.
I provide a one-print STL and 3mf File, as well as one GCODE for printing in ABS.