1 / 1
GX12 Aviation Connector Dust Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dust cap for GX12 "aviation connectors"
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 104
- Makes
- 1
- Views
- 471
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
About
This is a dust cap to protect GX12 “aviation connectors” when not connected. This variant is designed for plugs and flange-mount plugs.
There is a 13mm hex and a slot for removing the dust cap with appropriate tools.
Additional Parts
In addition to the printed parts, you will need:
| Amount | Part |
|---|---|
| 1x | GX12 plug or flange-mount plug |
Recommended Printing Parameters
| Orientation | Print in the provided orientation of the STL file |
|---|---|
| Support Material | Print without support material |
| Layer Height | 0.2 mm |
| Nozzle Diameter | 0.4 mm |
| Material | PETG |