Counting matching models…
4 endcaps for Nema 17 sized stepper motors, allowing the use of GX12 (12mm diameter) locking circular multi pin connectors. More robust than the usual 6 pin JST connector or straight wires coming from the coils, both of which are prone to…
You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight.
This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…
Designed by Wga I print it with PLA, TPU maybe
The device is designed to make it easier to hold the radio during flights. This makes flying your drone much more comfortable and takes the pressure off your hands. It has a folding mechanism that takes up almost no additional space when…
Inspired by PunongBisyonaryo design. Thanks a lot. Use only flexible filament. Scale: GX12: 100% GX16: 125% GX20: 138% Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Flex…
About This is a dust cap to protect GX12 “aviation connectors” when not connected. This variant is designed for plugs and flange-mount plugs. There is a 13mm hex and a slot for removing the dust cap with appropriate tools. Additional…
Ein Gehäuse für die Steuerung einer CNC Maschine mit den Komponenten eines Arduino Uno R3, einem CNC Shield und GX12 Stecker. Ich nutze diese Steuerung in Verbindung mit Estlcam an meiner MPCNC. Zusätzlich werden 4 Schrauben 3*12 für den…
Print Settings Printer Brand: Anycubic Printer: Kobra 2 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Flex TPU
Remixed of DoukDouk's model , specifically the folding arm, simplifying its design and changing it to a simple fixed length. Arm works with the base of the original model and its file is included. Will need 2x M3x10mm/12mm to mount the…
Designed with ABS in mind for the marine environment in lots of sunlight. Printed on Bambu P1P with standard 0.2mm layer height. This was modeled in the non-commercial version of fusion, this design is not a 100% copy of the original…
я печатал из TPU. но подойдёт любой пластик.
Features Fits perfectly for anything with a GoPro mount Great overall stiffness to prevent shaky footage Fits nicely inside your carrying case for the radio Quick-release design - no need to unscrew all the way and have 2 loose screws!…
a controller box for five ledstrips, made for an AZdelivery ESP32. partslist: AZdelivery esp32 Terminal block I used this…
MagneTicFocuser [MTF] without electronics This is a second variant of the original [MTF]: https://www.printables.com/de/model/251874-magneticfocuser-mtf I designed them to run this system on an OnStep controller. OnStep offers the…
A dust cap for the male end of GX12 connectors, originally intended to provide extra protection for the Lab599 Discovery TX-500 radio. Tested in both PLA and ABS, screws down nicely with proper 13mm threads. The pictured BNC cap is the…
print 2 pcs mount , miror the other one for other side mounting using the m3 screw from the strap, the stand mount using m2x12mm and nuts
ENGLISH Each file contains a printing instruction in the form xx-xx. The first number is the precision, the second the filling. For example 02-30 means accuracy of 0.2 and filling at 30%. It is also useful to double the thickness of the…
A dust cap for the female end of GX12 connectors, originally intended to provide extra protection for the microphone of the Lab599 Discovery TX-500 radio. Tested in both PLA and ABS, the connector's ring screws down nicely. The difference…
The Radiomaster GX12's screen can suffer in bright light. This shade slides onto the top of the screen to shade it somewhat and make it easier to read. The shade is small enough to be kept in the suppied transmitter case. Print with 100%…
I couldn’t find a tool to remove these nuts without scratching them, so I made this wrench. I printed it in TPU with 100% infill.
About This is a clip mount for mouting cable connections with GX12 “Aviation Connectors”. Multiple clip mounts can be connected to each other to mount multiple cable connections. There is a mounting hole for an M3 or M4 mounting screw.…
This is a remix of AZ-Touch replacement case with optional holes to mount up til 4 GX12 Aviation Connectors
A simple dust cap for GX12 connections like those found on T12 soldering stations. M13x1 thread if you were wondering.
Remixed endcap for Nema 17 sized stepper motors with a: 20x40x40mm fan GX12 (12mm diameter) locking circular multi pin connector The endcap supports a motor with coil pair wires and the GX12 connector is orientated to the side. It also…
This one requires GX12 4 pin connectors, and really cleans up the umbilical management! rest is self explanatory I hope, the required items are the same as listed in the original github.
This is a remix of a remix. The original file uses GX16 connectors for general wiring, and XT60 for power. The remix uses a DB37 connector (?) for general wiring, and a Auto 6 Pin Power (??) connector for power. This backplate remix uses…
Sleeve chaves pdt do Radiomaster Gx12
takes just a few mins to print and makes screwing in much easier.
This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…
A simple stick protector to replace the paralon transportation stick protector. Protects equipment from scratches when folded. The tread size is increased for better protection with larger endsticks. For printing, it is recommended to use…
Radiomaster GX12 Folding Handle. This is a remix of a nice handle by Bevan. Unfortunately, when fitted, the radio will no longer fit in the rather nice case provided by Radiomaster. Wishing to use the original case, I set about desiging…
Doesn't block ports, vent or external module bay. Use screws from original cloth handle. Print with extra wall and any 3D infill. ASA or PETG as material suggested especially if cooling fan is in active use due to high power output or hot…
Case for an Arduino Due : https://lebois-racing.fr/arduino-due-amazon Originally designed for the SRT seat belt Tensioner : https://lebois-racing.fr/tensionneur-de-harnais-p1 You can fix it with two M5 or M6 DIN7991 bolts :…
![MagneTicFocuser [MTF] GX12](https://media.printables.com/media/prints/344483/images/2935363_da8b2c08-f1fe-4c78-aed0-c6490a1b7bd8/mtf_gx12_front.png)
