1 / 3
Sony LAM-Z05 Replacement Speaker Grilles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement speaker grille for the Sony LAM-Z05 MiniDisc player
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement speaker grille I designed for my Sony LAM-Z05, after mine did not arrive with them.
These are made so that you can cut and trim a mesh or cloth fabric of your choice to sew into the frame.
Printing Instructions
- Print the frame flat side down (with the holes for the grommets facing up)
- Print the clip long side down also
- Print the grommets in TPU
Assembly Instructions
- Print all your parts.
- Cut an 85mm x 125mm piece of fabric.
- Stretch the fabric and clip it on each opposing side of the frame.
- Cross-stitch the fabric, then stretch and repeat for the other side to maintain tension.
- Repeat for the other lengths.
- Place the clip over the frame
- Insert the grommets
- Trim the fabric as needed for appearances
- Place onto the speakers.