Cap for can diameter 75mm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.69 net (excluding VAT)
For file: Vicko_na_plechovku_0.4n_0.2mm_PETG_MINI_38m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Víčko na plechovku o průměru 75mm
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 1
- Views
- 75
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
EN:
Just another of the many lids for 75mm cans.
Printed in PETG, layer height 0,2mm, 2 perimeters, no supports.
CZ:
Prostě jen další z mnoha víček na plechovky o průměru 75mm.
Vytištěno z PETG, výška vrstvy 0,2mm, 2 perimetry, bez použití podpěr.