PTFE Filamentguide für MK3S+/MK3.5(S)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this mod you can connect any Drybox(e.g. SUNLU S4) or simiular Storageboxs to your MK3S+ or MK3.5(S).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 22
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The following parts are required for assembly:
1x M4x10 countersunk screw
1x M3x10 countersunk screw
1x M3 nut (forMK3.5 Tubeholder_Bottom)
1x M4 threaded insert (for MK3.5 Tubeholder_Bottom)
https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs
3x M5 threaded insert (for FS-Cover and MK3.5 Tubeholder_Top)
https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m5-short-50-stk-pcs
3x d=4mm hose coupling M5
https://www.amazon.de/dp/B081NDL8K5?ref=ppx_yo2ov_dt_b_fed_asin_title
1x PTFE Tube l=440mm (from the Extruder to the Tubeholder)
1x PTFE Tube from the Tubeholder to your Drybox or Storagebox
For mounting on the printer, the FS-Cover and the right Z-Axis-top must be swapped, the Tubeholder_Bottom must be screwed onto the Z-Axis-top with the M4x10 screw and the Tubeholer_Top must be fastened with the M3x10 screw and M3 nut so that it can swivel freely.