Rasberry Pi 5 RGB case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Case for the Raspberry Pi 5 with the option to add an RGB LED.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 0
- Views
- 837
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is a Raspberry Pi 5 Model B case that I designed. It has the ability for an RGB LED to be istalled on the top right or left.
On the Back of the case you can unscrew the back panel to reveal some passages for the wires needed to hook up an LED.
Assemply of the case is pertty easy. You need seven Metel screws of wich 4 are M2 screws and three are thumbscrews. But you can also replace the thumbscrews with something smaller like Mainboard screws. The M2 screws should be used on the Raspberry Pi and the other screws should be used on the back panel. The top goes on without any screws and is fixated by the USB-C and HDMI ports.