Shaker or match pellet box 4,5 5,5 mm .177 .22 slugs various heights and grids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Match pellet box in several heights and grid shapes for easier access
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 189
- Makes
- 0
- Views
- 1,205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I thought the available shaker boxes were a bit steep pricewise and also very crammed for my big fingers. It started with the idea of a somewhat wider grid for convinience and escalated from there into a modular box system when I figured out, that severel sizes would make sense depending on shape and length of the preferred pellets. Until I had the tolerances figured out and drawn it all up I could have just bought a couple of the available boxes, but where is the fun in that?
First one needs to choose a required pellet length.
Short is likely for flat head pellets.
Medium works for round head pellets I have here.
Long is mostly for slugs I found.
Then one needs a lid in that size, decide for a pattern of the screen and a box in the same size.
Box and lid differentiate in height, screens too around the edges minus a tolerance, however here also the thickness of the floor is important to hold the pellet upright and also leave enough of the tail sticking out and be able to grab them.
I only use 4,5mm caliber, hence I could only test the screen size with them. The files are available for changing to 5,5mm or WHY pattern wise. There is a standard 100 holes pattern as in the commercially available ones and a somewhat further spread 49 holes pattern I started the whole thing for.
As in the pictures they are printed in PETG 0,2 height and work a treat, it even locks just the right amount with the little ledges.
For convenience there is a pellet gauge to calibrate the hole sizes depending on the printer and material used.