Counting matching models…
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
This is a model of a 4.5 mm diabolo pellet used in compressed air pistols and rifles. It is based on a real RWS R10 pellet and is designed in mm. You may not see it when you open it in your slicer because it's small. Once you upload it in…
Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm
The diabolo airgun pellets are scaled to 1 inch and can be scaled down to the desired size as needed. For use in PCP airguns only, never use lightweight pellets in in spring powered airguns.
While I designed several parts for my 9mm Airgun, I need to model some types of ammunition. Those are not for printing but if you need to make a design, you can use the STEP files for place into your design. The Models are created by…
Print in PLA Stackable Sliding lid 9mm for e.g. AEA HP Max
Original Upload by https://www.thingiverse.com/_iw0gz_ A project of the Proteo Explorer Team https://www.facebook.com/proteoteam/ Printer brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 50 Filament…
I created this model to replace my sisters old Diabolo toy, which gave us some very fun memories and laughs. You will need to tie some plastic like string to the ends of the sticks(typically sold in hardware stores) and some glue to hold…
Put the 4.5 mm ball in to a hole. Inventor sources included.
Sehr hilfreiches Magazin zur Aufbewahrung von 10x10 Stück R10 Diabolos (Bleihütchen für das Luftgewehr). Ideale Entnahme der Diabolos vor dem Laden des Gewehrs im Wettkampf. Das Klappmagazin kann mit einem persönlichen Logo 60x60 mm (max.…
Print in PLA Stackable Sliding lid 7,62mm e.g. for FX Dreamline …
a simple wall mount for diabolospellets ammo
Hi everyone, here the diabolo I designed from scratch. However, it may look like others. This is the one I made with freecad to illustrate the Mount for diabolo part. Enjoy. Regards Froggy Category: Games
This model does not include the clamp, on the plus side you can get whatever clamp will fit your becnhrest. When benchrest shooting with an air rifle you often want to attach the ammunition box to the actual benchrest, so you don't have…
Druckt mit drei Wänden und ohne Support. Die Pellet Dose wird von vorne in die Halterung geklipst. Die 20mm Version passt für JSB, die 22mm Version passt bei UMAREX und H&N.
9 mm Diabolo for Airguns with hole for lead ball (4,3mm, but 5mm also fits) for added weight just heat after some uses to get them to grip rifling again made for TPU to get more than -1- use print 25 to justify turning on printer advised…
As i often shoot with airguns with friend i came up with this idea, why not create a single box with place for 5 different ammo types in it so you dont have to take all the single ammo boxes with you. So i custom made this one with name…
Hi everyone. here a design wich is not attended to be new. It is very simple and may probably look exactly the same as others. But I just made it from scratch. A separate mount system to be put along the wheel of the diabolo will be…
A tray for storing pre selected diabolo 4.5mm munition for competition purpose. Tray fits into standard boxes (160 x 80 mm)
This little helper is an alternative to the 100 pellet containers. It makes fun working with it. You fill a couple pellets into the upper part of the loader, mix the pellets and soon you have 10 pellets in the appropriate holes.During…
Print the caps with TPU for a longer lifespan for the diabolo, as other filaments tend to break quite easily. You can print the middle part with your desired filament. Make sure you use a suitable screw that fits the hole; it has a…
For M10 hex screx.
This is a remix of a model made by @elliesaurus_2358786 . i was annoyed by the tiny feet at the bottom, making it impossible to print face up. i have removed the feet. the model is otherwise not changed. This is no fault of Ellie, it's…
nub holder madbull shark mod diabolo
If you have old Diabolo with broken plastic part as i have, you can print this model and make new one. The metalic parts on photo are used from old one. In STL file is only one part - you have to print it twice . easy to print PETG…
Hello. I designed this Diabolo crown case for my Walther CP99. Printed in PLA without supports with a fill rate of 15%. For the assembly it will take 2 countersunk screws M3x8 or 3x10 no longer. one M5x80 socket head cap screw with…
Klemme um ein versehentliches Öffnen der Diabolo-Box zu verhindern. Für RWS-Büchsen, für andere muss evtl. angepasst werden.
Corchete de diábolo Hola Se trata de un sistema multiusos que sirve para unir y organizar la gran mayoría de tejidos y se puede emplear en calcetines, camisas, trapos o cualquier textil de grosor mediano. Dependiendo del tamaño en la que…
Yoyo + Diabolo + baseball holder
Onshape model: https://cad.onshape.com/documents/066fd45e7e31bbdd7a8df6aa/w/4856f9d67df3d188b72776bc/e/f6523e39d90762a8bac8b655
My metal diabolo sticks are over 30 years old but still going strong. They came with plastic grommets whose holes eventually widened out irregularly and I never found a supply of replacement grommets. Finally with a 3D printer I can make…
Hi everyone, here a mount to be printed along with my diabolo design (or not). You need to make sure that the size of the internal rim is the same as your diabolo. You may want to fix it with your diabolo. You need two rims and 8 small…
Hallo zusammen, heute habe ich eine Wandhalterung für ein Diabolo entworfen. Einfach mit 2 Schrauben an der Wand zu befestigen. Viel Vergnügen ;) Hello together, today i designed a Wall-mount for a Diabolo. You need 2 screws to fix it on…
Hi everybody, The idea of the mount is to add extra fonctionnalities to any flexible diabolo (needs to be however printed sothat it is fitting the diabolo part). I improved the first mount I proposed to add a bit of flexibility by using…
The Hobby King Diabolo is an older EDF RC Jet that has been out of production for some time. A friend recently had the canopy come apart in flight and the resulting damage was not repairable. I created this model so he could keep flying…
I printed in PLA and TPU, PLA broke after dropping it from 20m
Ein Kreisel für Diabolo Üben Tipp: Nehmt eine dichtere Füllung
Print the caps with TPU for a longer lifespan for the diabolo, as other filaments tend to break quite easily. You can print the middle part with your desired filament. Make sure you use a suitable screw that fits the hole; it has a…
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
[DISCLAIMER: I do not have printed this yet. only the bearing part... I have to rework this part. I need to get longer needles for the bearing otherwise it will not align. So I am pretty sure the design will not work. but I will work out…
