AMAZEMET upper housing graphite o-ring lock and holder removal tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AMAZEMET upper housing graphite o-ring lock & holder removal tool, for use on arbor press.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
AMAZEMET upper housing graphite o-ring lock & holder removal tool.
The original instructions are to set the upper housing on the ground and use a mallet to knock the graphite o-ring lock and holder out of the assembly.
This allows you to (1) not damage the alignment ring, (2) not need precise aim with a mallet, (3) do this on the table surface not floor, and (4) use an arbor press if you have one handy to smoothly push the lock & holder out.
Other filaments will be more sturdy than PLA, but this operation does not require significant force to remove the lock and holder.