Filament guide through shelf with PTFE connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament guide through shelf with PC4-M6 connector for PTFE tube
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 56
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Filament guide with PC4-M6 connector, designed especially for IKEA SEKTION/METOD shelf (18mm thickness), but should be easy to rescale - just extend the no-thread part of the channel.
Drill ∅10 hole for bottom part to slip easily - sleeve diameter is ~9,5mm.
Sleeve thread is designed to stick out above the nut with an 18mm shelf (by ~1mm).
Inner diameter of the channel/sleeve for filament is 2,4mm, which should works well with PTFE tube 2,5mm inner diameter.
Requires no support - above PC4-M6 connector there are rectangual supports for diameter dimension change (like PRUSA likes to make in their designes).
For better thread quality I'd recommend 0,1mm layer height. Mentioned rectangular supports are 0,2mm high so still should work with 0,2mm layer height, but I didn't test thread with that height.