Even Realities G1 Mockup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scale mockup of the G1 glasses from Even Realities so you can try before you buy.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 209
- Makes
- 0
- Views
- 952
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are a scale mockup of the G1 glasses from Even Realities. These are so you can see if the glasses will fit and look good before spending the money on a real pair (especially if you have a prescription since they would not be returnable).
I modeled these using the sizing guide on the Even Realities G1 product page so they should be quite close to the real thing. If you own the real G1 glasses please compare and comment how accurate they are.
The arms slot into holes on the frames, tape/glue or sanding may be required depending on your printer's tolerances.
I used PLA with 0.28 layer height @ 230 °C with a bed temp of 55 °C.
Supports are required due to the arms, I recommend using the auto tree/organic type.
Also on MakerWorld for direct to Bambu Lab printing https://makerworld.com/en/models/729212