Counting matching models…
I just gave it a flat bottom so it sits flush on the build plate. All credit goes to the original creators. My cat was not willing to model it for me
When building my Voron I was looking for a nice bed fan solution 🤔 that would fit my Nevermore and help to bring the chamber temperature Even More up🔥 to where it belongs. Since I couldn't find anything that I really liked, I decided to…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
🔩 Washers Collection 2 – Imperial & Metric Sizes 🔧 I greatly appreciate every like, comment and download! 🛠 A versatile set of printable flat washers designed for various bolt sizes . Perfect for DIY projects , mechanical mockups , and…
This clip needs to be installed on the bottom filter, 4.25" from the side with the tab. You can see a video showing how to install it (and more) here: I printed it with PETG since it's more flexible and won't melt in the heat of the…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
A small handheld spiky roller of sorts. Can be used in kink, for sensory purposes, or whatever else you want to use it for. This version has more spikes + a loop to attach a strong/lanyard.
Commercial Licence I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH A compact and satisfying FN Five-seveN –…
Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
This is a even more hexed version of the playing card box with a convenient sliding lid.
This is a remix of https://www.printables.com/model/239612-big-bag-clip-with-screw-on-cap , which allows to close larger bags. I have extended the length of the clip by 25mm, to make it easier to close larger bags.
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was originally looking for a key ring that was 1) easy to use 2) easy to print…
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
This is a modification of an older model I posted as I wanted to see what the limits of printing long articulated models could be, turns out, it’s a lot! There are 5 models in this pack: A 1 segment test model you should print before…
This is a .stl and .3mf model of a pickle i created. have fun!.
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
7-Eleven is a popular convenience store chain that has been around for decades serving up snacks, coffee, Slurpee's, and Big Gulps. There are stores all over the globe, each with their own unique offerings. Most of the US locations stock…
This is a mechanical seven segment display that counts from 0 to 9 using a single camshaft. Non-printed parts 8x Square M3 Nuts 4x M3x6 screws (or longer) Plastic glue Printed parts 1x Front plate 2x Side plate 2x Top/Bottom Plate 7x…
An easy to print and use clip for keeping plastic bags closed inspired by those hoodie drawstring clips: Print instructions: Print in the orientation the STLs are imported Use supports - tree (organic) supports work perfect Use at least 3…
Even bigger MK3s side boxes with cuts for better access to the card and knob. Print instructions I've printed my pair with PETG orange Prusament.
Pillendose Mo-So Morgen bis Abend Ich habe die tolle Pillendose von Dante (@Dante_355273) bereits mit 125% Skalierung gedruckt und für meine recht großen Vitamin-Tabletten im Einsatz - vielen Dank dafür! Nun habe ich sie erweitert um eine…
Lord of the Rings (Evenstar Pendant and earrings) Print Settings: Material: PLA, PETG Layer height: 0.20mm Supports: no Perimeters: 2 Assembly is needed Happy printing!
This is a remix of Steve Medwin's awesome "Customizable Straight Beam for LEGO Technic" OpenSCAD part first posted on Thingiverse. It is also written in OpenSCAD and is Customizer-compatible. I'm testing the waters bringing it over to…
I removed some excess material from the original, extended the screw holes so you can use the original fan screws for attachment, and improved print supper by extending the two bars near the filament cutter. This new cover helped…
I've also designed an 8-drive version that uses a backplane. This drive rack holds seven standard SATA drives in a way that they are hot-swapable. It takes up 3U on a 10" mini rack (I used the GeeekPi one). The main body takes a while to…
English The original model from Thingiverse needs supports, but they are difficult to remove (at least without destroying the model :-)). I have modified the model so that it rests completely on the print bed, so no supports are needed.…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
I threw this together quick in Shapr3d for a fun ornament for the kids to share and figured I'd share the model. It can be scaled up for use as a holiday ornament, or scaled down for a simple charm for necklace or bracelet. Print times…
Temporary note: Hey there! If you loved this design, please consider voting for it in the FLSUN 3D design competition found here: https://flsun3d.com/pages/gallery It doesn't take any time or money, but I'm a high-schooler who would…
Simple pencil topper that kids of all ages go crazy over. I have finally got my kids to hate it.
Larger glasses tend to slip and slide down your nose and eventually fall off. These easy to print ear hooks will prevent that from happening. I highly suggest that you print them with some sort of flexible material, the softer the better.…
Important: There is a new version that uses only a single camshaft. You should use that version instead. This is a mechanical seven segment display that counts from 0 to 9 using a pair of camshafts. Non-printed parts 4x Square M3 Nuts 4x…
Shrinathji is a form of Krishna, manifested as a seven-year-old child. The principal shrine of Shrinathji is the Shrinathji Temple in the temple town of Nathdwara, 48 kilometres north-east of Udaipur city in Rajasthan,India. According to…
Seven Tailed fox. also used as test for: Overhangs Stringling bridges and more. made by https://www.thingiverse.com/thing:1946072/files w/o supports from https://www.thingiverse.com/thing:1670514
A simple seven-segment stencil that let's you write digits like on a digital clock. Two models are available for printing: Single digit stencil (4g~ of filament) Double digit stencil (8g~ of filament) No special print settings required.…
When playing Everdell, I find it hard to pay attention to the Special Event cards, especially when sitting a good distance away from the Evertree. This leads most players to forget about their existence, or forces them to have to pick…
the sensor is from aliexpress: (20x25x71 mm) https://de.aliexpress.com/item/1005006008193742.html the two parts just snap together I would only print this in white :) Other colors including black will heat up more in the sun! printed with…
This is a seven day pillbox to be made out of a flexible filament. The lids snap close, stay tightly closed, and are designed to have an oversized area to grip to open for people that have difficulty with their hands. Additionally, each…
I made this planner for the morning routines of my kids. One (8yo) of them needs no help whatsoever in getting ready for school but the other (6yo) cannot focus when time is short. This helps a great deal and makes it easy and fun for her…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized 3D figurine inspired by Eleven from Stranger…
Replica of Rose Quartz's sword from the animated show Steven Universe. The sword blade is reinforced with a threaded steel rod during assembly. Photos show the sword after gluing, sanding, and painting. We have a video covering the entire…
This Stevenson screen is compact, fully printable and easy to mount. The socket has a hole with a 12x1,5 inside thread to hold a standard PG7 cable gland. To the top, the socket has an 20x2,5 outside thread to hold the hat. The hat must…
These will need supports but I do my best to make them print friendly. Be mindful of weapons etc... when removing supports! Updates: Feb 20 added one more standard zombie in a custom pose Models in this collection: Standard Zombie x 3…
Filament dry boxes based on https://www.printables.com/model/634289-filament-dry-box-cheap-and-simple I started building dry boxes using the original parts and saw lots of opportunities for improvement. I re-engineered almost all the…
A tray for the various tokens, dice and event cards (without sleeves) for the Awaken Realms boardgame “ISS Vanguard".
🎮 “67 – six seven” – 3D Printable Meme Model Dive into the fun with this quirky 3-D printable model inspired by the “six seven” meme that originated from a basketball game. This piece is designed to capture the absurdity and charm of the…
Introducing the Everdell Leaf For Special Event Cards. If you have encountered the problem of not seeing Special Event cards during your games, this is for you. During my games, my wife and I have noticed that we often forget about these…
for shelves thick up to 35mm, dont be surprised, i used the same image, so that i dont have to print it again
A fun and educational toy. Just simply print as many of each cog as you want (I suggest printing a larger number of the smaller cogs) plus some connecting rods, and frame. The kit is designed to take a small cd-rom motor, but this is…
Model Description: Roblox Rivals "Event Horizon" Sniper Rifle This 3D model is a highly accurate, supportless-optimized recreation of the cosmic Event Horizon sniper rifle skin from Roblox Rivals. Designed with 3D printing in mind, it…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Essentially this is the "simple box for vase mode" made by vintrlos but closed. I thought the original design was really good but it was a bit to flexible when printed it with PLA. So I took all my nonexistent skills and put it into…
Excellent original design that ticked almost all the boxes for me. I removed a few millimeters around the face edges to fully expose the lovely board design and removed the block portion of the lower back so that it can sit on its built…
Yet another Stevenson Screen for your weather station. The wall mounts have to be screwed. All other parts require no screws and snap together easily. Print 5 or more stevenson_shield_v3-shield.stl and stevenson_shield_v3-pole.stl for…
This is a discrete Air tag holder to make sure you know where your car is for situations including but not limited to your car getting stolen, or when you just can't remember where you parked in the Walmart Parking lot. It also serves as…
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
As reminder of good old times, here is the keycap of a classic game "Doom"... Heard the ROOARRR as it aproaches to you! Print as fine as possible, and enjoy paint it! Works for FDM and SLA printers. No need for supports or raft.
Table tennis adapter for Quest 3 To assemble the adapter, you will need: 2 M4 screws, length 15 to 22 mm 2 heat set inserts for M4 screws (mine are 8 mm long) Glue to fix the racket and the two handle halves together. You can align the…
⚫ Sonic Screwdriver 7th Doctor ⚫ It's finally here. Another sonic screwdriver this time from the Seventh Doctor. More sonic screwdrivers coming soon! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for.…
Thin fillers to go in the front and back 4040 rail slots. There are 8 visible slots on the top of the S3 V2 Neo, plus more around the sides so print as many as you need. Can either be remodelled to shorten, or cut with scissors! The model…
Scanned using Reality Capture and touched up in Meshmixer. Pink is the original and the black is the copy. I recommend using a raft and supports for the belly. Print instructions Category: Animals
This is a solar radiation shield for mounting a temperature sensor outdoors. The shield allows air to flow through freely, but protects the thermometer from direct and reflected solar radiation. This provides a much more accurate…
Ready to print on any 200x200mm bed. Prusa i3 default 0.2mm draft settings <90 min print
(Due to issues with Thingiverse this blaster (and the last 2 I uploaded here) did not appear in my Thingiverse profile nor did it sync here to Printables so am uploading directly.) Hi, still a noob 3D modeler here, this is a variant of my…
This fan duct directs air in front of and behind the nozzle with three separate air streams for more even cooling and better overhangs on all sides of the nozzle. Works well for me between 20 and 40% fan speed for most models. My…
The is a Stevenson Screen that I designed for my Arduino based weather station. The top is designed to install M3 brass threaded inserts. On mine I printed 2 middle sections and a top and bottom to make my screen. I used M3x65mm screws to…
Posed Revenant from Doom. One posed model and pieces of the overall character that I eventually glued together. I haven't tried printing the entire thing all at once, not sure if that will work. Attached photos of a painted version. Print…
This is one of those big hex bolts except its a heptagon. Totally unnecessary but I just think it looks cool. I guess you could put money in it, but I think the bolt is so cool that people will steal the bolt, so you'd lose the money…
A simple holder for dropper paint bottles, such as used by Vallejo, The Army Painter, and similar. The earlier design I made was for five, but there was some extra space so I replaced the ends with these seven bottle holders. It is…
Cosplay accessory from the Netflix series "Scissor Seven". Print the logo first (0.2mm height) and then the bolts in a different color on top.
Pillbox 7 days - morning midday evening print 1 x Box 7 x Cover
Let me introduce the jubilee 10th model from the "Little pit stop" series . The model consists of car body, small wheels, large wheels, small off-road wheels, large off-road wheels, robust screws as semi-axles, car key serving as a socket…
This is a mechanical seven segment display that counts from 0 to 23 using a camshaft. It will show this pattern of numbers during one rotation: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 1, 2, 3 This is specifically…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. Movie accurate version of the DC15A rifle to use with 6 and 12 inch figures since Hasbro and Hot Toys continue to not use the movie weapons with their…
Blue is an option with a slight upwards orientation which might benefit forehand strokes. Purple is an updated model labeled V2 which has an orientation inbetween solidslime V2 and Wasyl adapter.
Avenged Sevenfold A7X logo 3D
This model is compatible with the lego system.
Couldn't find any holsters online that I liked, so I designed this one. It locks the replica in place by a little indent, holding it securely in place. Printed in PETG, as it needs a little flex for the indent to work best, I'd assume. I…
A life size prop of the Rod of Seven Parts from the Vecna: Eve of Ruin Dungeons and Dragons adventure. As you play through the adventure you can give your players a physical prop of the rod pieces as they find them in the game. It has…
From : https://www.thingiverse.com/thing:1680619 "I have been carrying character and team tokens around to hand out and I kept breaking the pika tails off in my pocket. I found this strengthened version but it is still only stronger below…
Hi Kevin, I though this helmet was cool and made a Variation of it that kind of reminded me a little bit like a Madalorian helmet. Its a start ; ) It wasn't till I researched some pictures that I found there is a lot more detail to be…
I tried out multiple models to mount my ESP32-Cam to my gasmeter. All of them had the issue that the LED on the ESP32 caused reflections on the glass of the gasmeter, which resulted in poor detection by AI on the edge . You can make all…
This set includes three resin or glue spatulas with different flexible tips for achieving precise and even application. The flat, semi-round, and rounded tips allow for versatility in spreading and smoothing the resin, making them ideal…
Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…
A highly detailed 3D statue inspired by Eleven (Jane Hopper) from the TV series Stranger Things . The scene captures her iconic moment of intense concentration, channeling her telekinetic powers as energy rises around her. The pose,…
This is a Remix of the 5.56mm Battlebox (shared by EvolvingExtrusions via Thingiverse) which has been resized and relabeled to hold 50 rounds of FN 5.7x28mm most commonly used in the FN Five-Seven and P90. I resized using PrusaSlicer and…
Just another seven segment LED clock. Current version of SW working, but it isn't final version. What is working: time on dislpay synchronization from NTP server time in local time zone. This zone must be specified manually on source code…
You can find the V2 of this project here : https://www.printables.com/model/1173424-stevenson-screen-v2-for-temperature-sensor You need: one base one bottom one top how many middles you need to reach the desired height 4 threaded shaft…
another one of those mini climbing hangboards for warm up / training. one uneven edge for optimal finger positioning, one smaler crimp and outside pinch
Design in OpenSCAD to be printed all at once on a Replicator and snapped together. Just print and put together - no need for glue! Print instructions Category: Props Instructions Print Peel off platform and the thin first layer Insert one…
Seven Samurai Book End Designed in TinkerCad, prints in about 6hs best placement on print bed is face down but you can play around with no, no need for supports. Print instructions Category: Decor Print Settings Printer Brand: Creality…
I have printed the parts using PETG filament as this was the only filament in blank white color I had in stock. Unfortunately the filament has a very poor quality. The filament appears to have very poor diameter accuracy. For this reason…
As a fan of the Stargate series, I of course picked up one of the 20" Stargate Mirrors, that came with a plastic event horizon. Well, mine broke. So I designed and printed this replacement. The Event Horizon fits the mirror perfectly at a…
Pillendose - Pillbox - morning midday evening
Basic cover for A5 sized disc-binding systems. You can use your favourite modeling tool to emboss something into (or through) the cover for specific designs. This is just a basic core template.
