Snoot / Egg Crate for 150W LED house Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stops the field glare from house lights with minimal change to beam
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
The house lights in a venue I work in have a low angle glare that comes off the lens, so I made this model to cut that out as much as possible with mininimal change to the main beam of the light.
The ‘snoot only’ model cuts out the bulk of the field of the light. The ‘EggcrateSnoot’ model cuts out more of the field glare and a very small part of the beam.
Made for "Moonlite 150 SW/SC", which is the same as the “Showtec Performer Pendant 150”, and it probably also fits other similar sized LED house lights.
There are four holes to screw it to the light in the accessory mounting holes. I used four black M3 x 5mm screws.
Printed in black ABS to match the lights I had.