Counting matching models…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added color separated plates for remake color scheme. Paint apps: head - yellow, white, black, green for details. chest - yellow, black…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added articulated Jaw. Assemble the jaw before putting in the frame piece for the head. adding onto EVA-00. Head extracted from…
This is a reproduction of an original picture frame carved by my great-great-grandfather around 1910. I 3D scanned it and split it into pieces to fit on a standard sized 3D printer. I originally created these files to create reproductions…
Check MouseBiteLabs for compatible reproduction PCBs and HondrusLabelShop for custom romhacks labels.
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one…
I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping. I came up with the idea to stack them on top of each other. Instead of 2 you could print 8 during night. If your printer has…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System armor elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one another, as…
Note: Build photos coming soon! This replica of the Starfleet Combadge from Star Trek: Picard is the perfect addition to any cosplay armada or combadge collection. This combadge is notable for following the trend of Discovery having…
This is my first attempt to design a 3D model not based on simple geometry shapes like rectangles and cylinders. This is based on a chess set produced by E S Lowe company from 1959 to 1974 - The Renaissance Chess Set. Print Settings…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…
constant velocity joint Gecik 1 x axe.stl 3 x biellette - PA.stl 3 x biellette - PB.stl 1 x butee.stl 13 x clip A.stl 1 x corps 3D.stl 1 x corps 3C.stl 1 x entr A.stl 1 x entr B.stl 1 x entr C.stl 1 x liaison 10 x 3.stl ( avec et sans…
Hello! Here is my reproduction of the SLR m-lok handstop. Fit without problems. Thanks for any support or review!
Logo of GLITCH Productions, authors of the Murder Drones series. Original logo has been vectorized using Inkscape. Two SVG files produced, one for black layer outline and one for white layer outline. Used just PrusaSlicer to create the…
This is my add-on to make the prusa mk3s full automated. More informations & step files at: https://github.com/d-weber/prusa-chain-production Print instructions Everything at min 0.8mm walls, gyroid 20%
These are all the 3D models I have designed and printed for my plastic extruder. You can find the full tutorial on Instructables by clicking the link below: https://www.instructables.com/Low-Cost-Plastic-Extruder-for-Fillament-Production/…
NOTE: The current version of this design is RC4. Refer to the changelog at the bottom for version differences. The bottom design has not changed since RC1. This is a remix of the Prusa RC2/RC3 face shield redesigned to provide better…
This is a collection of Out-Or-Production parts used in the Slizers/Throwbots line. They have been modified for ease of printing and scaled appropriately to work with each other, and existing elements. No Axles, Pins, gears, or Ball Joint…
I reproduced a vintage bakelite art deco outlet cover. I modified this file to be printable and into a US standard lightswitch cover and a US standard double outlet cover (complete with back ribbing). In order to reproduce the stylized…
This is a production tracker for the board game, It's a Wonderful World. You slot the colored cubes in each of the zero spots on the board and move them accordingly whenever you build a card into your empire. I made a spot for grey,…
This model was created as a replacement due to the original being destroyed in shipping. You can watch the full process - including finishing - in the following video. Enjoy!
Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later. Use the STEP files if you wish to change the models in some other CAD. Use the STEP or STL files to print as-is. The STEP files may need to be…
This is a reproduction of the Shell Garage from the Tyco US-1 sets. There are a few things to note when building this to get a quality result. The track should be printed upside-down on a textured PEI sheet. Also, take care to get the…
Parts to represent the late production (Tier-1 emissions) SD70MAC Locos that EMD built for CSX and Alaska RR. Also could be used for the Metra SD70MACH. NOTE: For proper fit cutting away at the lower radiator grill on the model is needed.
Kojima Production Logo Decoration
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System weapon and tool elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are compatible with one…
This is a small box designed to allow for clean, single-print printing of hinged components. This design was created using FreeCAD, so please use it as a reference when creating hinged components.
This is a fully functional reproduction of the Tyco Trucking US-1 Phonebooth Action Accessory track. The track should be printed upside-down on a textured PEI sheet. Also, take care to get the height of the first layer dialed in before…
Vectorized a png from somewhere and extruded in freecad. The design is a bit big and may benefit from being shrunk down. Either part is designed to be able to print in white 2mm, and then black 2mm after a filament change. Category: Signs…
Faithful reproduction Etruscan vase. It was scanned and processed in PhotoCatch. I leave the Blender file and the obj for anyone who wants to use or improve it.
A simple ergonomic design that can be mass produced and delivered quickly to medical staff in need. Designed in Mexico City to be donated to public hospitals as quickly as possible. The idea of the design is to make a low cost,…
The Making of a 3D Printable Zip Tie Using AI with OpensCad: A Design Journey What started as a simple request—"create a reusable zip tie in OpenSCAD"—blossomed into a fascinating, iterative design process. This project is a perfect…
The photo shows the original clip on the left, the reproduction, and an installed reproduction clip. Note that you should print this with a 0.25mm nozzle using high quality settings on your slicer. The model was made using SAE…
I haven't found proper stand for my Welly BTTF2 Delorean 1:24. So I have made one and will be happy to share it with you all. Print Settings Printer Brand: Creality Printer: Ender-3 S1 **Rafts:** No Supports: No **Infill:** 8-10%…
Doll's leg reproduction - Reproduction d'une jambe de poupée scan method with OPENSCAN from Object to 3d model : https://en.openscan.eu/
English Version: Template / Scale / Ruler for small production of Handrub (disinfectant, sanitizer, hygienic gel). WHOs formulation (World Health Organization) This is will help you to make a disinfectant based on the guide prepared and…
Scifi-esque remix of the longer 3C variant of the WE scar gbbr handguard that Shirley Productions recently released.
A simple token to mark Open Production cards in 51st State Master Set plays. Category: Toy & Game Accessories
A shelf for the Monster High Creeproduction dolls. Originally made in Tinkercad .
These models are for the USI Pi4 9" CRT monitor from 1982. There are the products of the following video:
🔁 Pokémon x Power Coin Mashup – Mega Charizard Edition This model is part of my crossover coin collection inspired by the power of Rangers and the world of Pokémon. 🪙 Print it at coin size for display, cosplay, or collectibles… OR hit…
there is 3 folder. you can just download the stand do modify with fusion or message me if need help folder 1 is just the phone stand with random pattern (i use 3D sketch to make) folder 2 is the phone stand with a coin shape hole for my…
Want an army of Benchy boats? Category: 3D Printing
A reproduction of the now-discontinued Jeep made by Fishel for army men sets, made by popular demand. It's not quite exact, I was working off reference images and 3D scans, but it is quite close. The screwed variants require M3x8 screws,…
Modified from Bricklink Part designer files, this is a collection of Out-Or-Production LEGO TECHNIC parts used in the Roboriders line. They have been modified for ease of printing and scaled appropriately to work with each other and…
PCB holder and organizer for your production. Print with PLA or PETG 0,2mm Layer height
My High School friend Bill loves 57' Chevys. He's had one since High School. He collects the cast aluminum License Plate toppers from the 1950's. He's always wanted one from Long Island. He was up visiting for my birthday and my…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Rulebook internal dimensions for the box 8 15/16” x 6” x 1 5/8” 8.9375 x 6 x 1.625 in 227.0125 x 152.4 x 41.275 mm…
The hammer is not functional it is theater prop, I made it lightweight with exaggerated hammer head to make it more noticeable on stage. There is no any logos on the hammer. Model has two separate parts (the head and the handle) you can…
Painted Glitch productions logo. Badge and Keyring versions.
Warning! This thing is usable but not "production" ready. I've built it myself and I'm just sharing my expertise here. See below for details This is a portal version of popular chineese woodpecker 2418 CNC (like this one ) . I always…
This is a chuck key holder for the Harbor Freight 20 In. 12 Speed Production Drill Press. It attaches to the bottom of the belt enclosure using the screw and nut for either of two front wire clamps, either left or right. The chuck of the…
Production Monitor Sony 9 PWM 1:40 scale various Styles
covers for elements for antenna production, Graves 143,050 MHz
This is a replica of the traditional convex plunger for the WICO Perfect360 Spill Proof buttons. This plunger will work in the original buttons also with the Modern Housing listed here as well. This can be resin printed or as a…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a replica of the traditional housing for the WICO Perfect360 Spill Proof buttons. This housing is a direct reproduction of the original button housing.
NOTE: This is not actually a remix, but rather an accessory I created to go along with shadowlink721's EXCELLENT insert set for the board game Furnace! It even fits perfectly into the unused slot left in the coin holder! Why would I print…
Arduino adapters for mass production Arduino board prices went up lately, and since I had a lot of Atmega88 chips lying around, it was time to mass produce my simple Arduinos. With the adapters one can load the Arduino ISP and/or user…
This is a replica of the traditional concave plunger for the WICO Perfect360 Spill Proof buttons. This plunger will work in the original buttons also with the Modern Housing listed here as well. This can be resin printed or as a…
EN AUDI TT 8J Mk2 manual gear knob, original reproduction of S-Line model IT AUDI TT 8J Mk2 manuale, pomello del cambio riproduzione dell'originale S-Line *Please feel free to advice me if the model need to be edited or perfectioned!
Tool for vegetative tree reproduction. Fill two hemispheres with substrate and attach them to a tree branch so that the branch passes through the hole between the hemispheres. Over time, the branch will take root in the sphere. The…
Update June 27th, 2022: In the meantime, I have also found another way of bonding silicone rubber without the chemical treatment trick described here. I have added the description of this alternative at the end of the article. Preface…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
“ Official Digital Calculator of the Zlotnian Space Program ” The Zlotnian Calculator is a joke calculator toy produced in 1976 by the Fingerbrain Company of Seattle, WA (USA). Pocket calculators were very much in vogue at the time.…
A simple Clapperboard using standard 90mm square office Paper as a writing surface. Uses a 608 bearing, an M3 Bolt and a M3 voron standard heat set insert. If you dont have a 608 bearing, you can find a 3d printed version here (Though you…
Some parts for the PrintNC have bevels on the axis that you're instructed to print them on, which makes them difficult to print with ABS. These models have been oriented and de-beveled on the build surface side. Category: Robotics
Just a fun sign that highlights the usefulness of 3D printing!
This is a replica of a traditional type of adze made by the Maori in New Zealand (this example printed on the original RepRap “Child”). The blade is usually made from pounamu, a type of nephrite closely resembling jade. Fine specimens are…
Here is all TPU prints to mount your fpv camera and VTX antenna on you Hermine Racer. Optimised to be printed without support 35 to 55° Nano Camera Mount 40 to 55° Micro Camera Mount 45 to 55° HDZero 90 Camera Mount Fin for Turtle mode…
Want to add a rival barrel attachment to your blaster? This is where to start. Just open up your 3d program and import this model. Do some 3D model voodoo and bam! You have a Rival barrel attachment. Don't have any barrel attachments? You…
🔁 Pokémon x Power Coin Mashup – Blastoise Edition This model is part of my crossover coin collection inspired by the power of Rangers and the world of Pokémon. 🪙 Print it at coin size for display, cosplay, or collectibles… OR hit that…
Cette applique murale a été conçue pour remplacer un modèle original des années 80 devenu introuvable. Le design a été modélisé à partir des dimensions exactes de l’applique cassée, afin d’obtenir un résultat fidèle à l’esthétique…
This is a clamp for attaching two laser markers to the nose of the spindle sleeve, 90 degree opposed for X and Y centering, to the Harbor Freight 20" 12 Speed Production Drill Press. Over the years, there have been at least 3 different…
I've lost my cap like Manuel, so I printed his model. Then I realised that his inCharge is a newer model than mine and it didn't fit. So I used his model and tinkerd it in Tinkercad to be suitable for my inCharge, that was originally…
Recently I came by the QIDI Plus 4 Screen Wire Plug from user Максим Батурин that helps prevent local overheating of the screen due to hot air escaping the heated print chamber through the large opening in the front to route the screen…
Extremely simplified model of a cropped out part from an atomically precise small scale factory. Convergent assembly. See: http://apm.bplaced.net/w/index.php?title=Gemstone_metamaterial_on_chip_factory The bottom layers with assembly…
Working as an Instructor I found that I need a standing desk / film production cart (just add fancy manfrotto grips and you are ready!) It can freely move around and be locked off too if you need it stationary. Mount with screws that give…
Introduction This is a kit for making customised 16mm or 20mm D6 dice in batches featuring full colour dye sublimated images and/or text. It contains: Pre-configured Bambu 3MF for the dice to be printed in PA6-GF Pre-configured Bambu 3MF…
Prusa 3D i3 MK2S pen holder for PCB production PCB production: Design board in Eagle Export as HPGL file File -> CAM Processor: Device: HPGL, Mirror, pos. Coord 3. Process the HPGL file in ThmqGCU.js to generate the G-code. Import local…
In 1965, Marvel Comics tried to rebrabd as Marvel Pop Art Productions and displayed this logo on their comics. According to Stan Lee, there was such an outcry from fans that the company reverted back to Marvel Comics and removed this logo…
This is a replica of the traditional housing for the WICO Perfect360 Spill Proof buttons. This housing is a direct reproduction of the original button housing.
I recently did a complete rebuild of my 2017 (?) Shan GT Rothmans and noticed a bunch of dirt and grime accumulated in the seattube around the bottom bracket, which must have creeped in over time through the hole of the internal dropper…
ESP32 Controller Board for production monitoring system, Environment monitoring system, etc.... WhatsApp link: https://chat.whatsapp.com/FSirSDKs7iE1Fp4d1rhu38 you tube channel link: https://www.youtube.com/@RAJTECHTAMIL contact number:…
This is a reproduction of a "papier mache", artisanal turtle decoration made in Cuba. My daughter enjoyed the original to the point it got completely destroyed. Luckily I had taken pictures before its demise in order to reproduce it. You…
Versatile modular storage system, perfect for organizing your workspace or home. Each module connects to others, providing a sturdy and expandable storage system. The files have different dimensions and geometries to accommodate various…
Over the last 20 years, some of the parts of our puppet stand have gotten lost or broken. To keep from spending hundreds of dollars on a new puppet stand, I decided to model and print them (3d printer for the win). This is the sleeve that…
MOLLE loop/web with Spyderco Knives logo reproduction for your gear! I wanted some Molle Loop Flair so I mixed a few models and came up with this! My Meta Quest 3 backpack needed an upgrade! So I sliced it for my U1 with some color, see…
This is my first industrial 3D printer model, the Desktop Metal Production System. https://www.tinkercad.com/things/edGpgoMYAeR-3d-printer-dm-production Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Doesn't Matter Notes:…
Tactile image of asexual reproduction by regeneration using a starfish for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited…
Tactile image of asexual reproduction by sporulation using a fungus for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
Tactile image of asexual reproduction by laceration using a planarian for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
Tactile image of asexual reproduction by vegetive propagation. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
Update 11-02-2026. updated all the files! The BMC is now at a stage I consider production ready, so have a go, do some weird design stuff. 12-12-2025: So, first major update, the BMC is definitely usable, I'm running it in my Foamo…
ecco a voi un altro modello 3D di prodotti apple. se ne volete altri chiedetemelo.
MOLLE loop/web with Toyota logo for your gear! I wanted some Molle Loop Flair so I mixed a few models and came up with this! My Meta Quest 3 backpack needed an upgrade! So I sliced it for my U1 with some color, see pics! I printed these…
MOLLE loop/web/buckle with Avengers on Molle Buckle! Spider Man, Captain America, Black Widow, Hulk, Loki, Thor, Falcon, Vision, etc. reproduction logos for your gear! I wanted some Molle Loop Flair so I mixed a few models and came up…
I recently got access to a laser cutter, so I was pretty excited to try this out. Cutting it was a learning experience in a few ways, but mostly about learning how to manipulate dxf files. The attached file is the file I used to do the…
