1 / 6
Logi C270 Privacy Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Privacy cover for WebCam C270. With spares for microphone and status LED. Surface mounted with double sided tape.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 1
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a privacy cover for WebCam C270, with spares for microphone and status LED. Surface mounted with double sided tape.
Parts needed:
- Printed parts
- Paper clip
- Double sided adhesive tape
Assembly:
- Print the cover parts
- Use the paper clip to mount the small cover plate on mounting plate. It should be tight so it will stay in position after opening or closing. If it is too tight you may use a small drilling bit to make the holes a bit wider. In case it’s too wide, just bend the paper clip in a wave form.
- Add double sided tape on the back side of the mounting plate but take care to not cover the holes.
- Place it on your Logi C270 WebCam.
