1 / 4
G5 Turret Ultra - Mounting Spacer — image 1
1 / 4

G5 Turret Ultra - Mounting Spacer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple spacer to mount G5 Turret Ultra extended from any surface. Mounting holes with extra space for bit holder use.

Rating
0 / 5
Likes
5
Downloads
78
Makes
0
Views
664
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Print from PETG, ABS or ASA but not from PLA if you need to mount it outside. Standard print profiles are fine. You can save print time using Support Cubic infill. The surface mount can take any screws up 4 mm diameter and the camera mount can be attached by 2 or 4 M3 x 10 screws. Self-tap the screws in holes.

There are 2 files larger and smaller extension height 50 or 70 mm:

G5 Turret Ultra camera mount extension 70mm & G5 Turret Ultra camera mount extension 50 mm.

Tags