1 / 4
G5 Turret Ultra - Mounting Spacer — zdjęcie 1
1 / 4

G5 Turret Ultra - Mounting Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple spacer to mount G5 Turret Ultra extended from any surface. Mounting holes with extra space for bit holder use.

Ocena
0 / 5
Polubienia
5
Pobrania
78
Wydruki
0
Wyświetlenia
664
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Print from PETG, ABS or ASA but not from PLA if you need to mount it outside. Standard print profiles are fine. You can save print time using Support Cubic infill. The surface mount can take any screws up 4 mm diameter and the camera mount can be attached by 2 or 4 M3 x 10 screws. Self-tap the screws in holes.

There are 2 files larger and smaller extension height 50 or 70 mm:

G5 Turret Ultra camera mount extension 70mm & G5 Turret Ultra camera mount extension 50 mm.

Tagi