1 / 1
VUT Mount to 1/4" 20 Screw and Tundra Tracker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to use Tundra trackers or other 1/4" 20 screw mounted stuff on VUT mounts, for example body straps or gloves.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution
Adapter to use Tundra trackers or other ¼" 20 screw mounted stuff on VUT mounts, for example body straps or gloves.
You'll have to use springs, around 5 or 6mm diameter.
You might have to put some foam at the bottom of the adapter, depending on the tolerances of your mount.
You'll find 3 different models :
- Adapter_Tundra.[stl/step] is the Tundra exclusive one, as it has the baseplate directly attached to it.
- Adapter_quarter_inch_side_buttons.[stl/step] is the adapter with a ¼" 20 screw hole at the bottom, you're free to use any kind of ¼" screws you find, can be 3D printer or not.
- Adapter_quarter_inch_top_buttons.[stl/step] is the first version of this adapter I made, the buttons to open the clasps are on the top, which made the removing the tracker rather difficult if you have something mounted on it (I had to use a screwdriver to poke at the button to get the tundra tracker off)
Note : I've not tried the first two, I made them after realising the mistakes I've made with the first iteration, some things might not go as planned, remixes and makes are welcome.