1 / 1
VUT Mount to 1/4" 20 Screw and Tundra Tracker — zdjęcie 1

VUT Mount to 1/4" 20 Screw and Tundra Tracker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to use Tundra trackers or other 1/4" 20 screw mounted stuff on VUT mounts, for example body straps or gloves.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Adapter to use Tundra trackers or other ¼" 20 screw mounted stuff on VUT mounts, for example body straps or gloves.

You'll have to use springs, around 5 or 6mm diameter.

You might have to put some foam at the bottom of the adapter, depending on the tolerances of your mount.

You'll find 3 different models :

  • Adapter_Tundra.[stl/step] is the Tundra exclusive one, as it has the baseplate directly attached to it.
  • Adapter_quarter_inch_side_buttons.[stl/step] is the adapter with a ¼" 20 screw hole at the bottom, you're free to use any kind of ¼" screws you find, can be 3D printer or not. 
  • Adapter_quarter_inch_top_buttons.[stl/step] is the first version of this adapter I made, the buttons to open the clasps are on the top, which made the removing the tracker rather difficult if you have something mounted on it (I had to use a screwdriver to poke at the button to get the tundra tracker off)

Note : I've not tried the first two, I made them after realising the mistakes I've made with the first iteration, some things might not go as planned, remixes and makes are welcome.

Tagi