Simple Bokeh Shape for Nikon AF-S 50mm f/1.8 G lens hood mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bokeh mask for the Nikon Nikkor AF-S 50mm f/1.8G (or any lens that uses the same lens hood)
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 90
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a simple bokeh mask designed for the Nikon Nikkor AF-S 50mm f/1.8G lens. It attaches using the lens hood bayonet mount, with smaller coupling tabs to allow for some rotation of the mask. The dimensions are optimized for a secure yet easy fit on the lens.
For best results, print in matte black (though other materials should work fine). I've also included a blank mask, so you can create custom mask designs directly in your slicer.
My goal was to make a mask that's quick to attach and remove, with some adjustability for rotation. All designs I found and tested so far either simply don't fit/stay on the lens, or are way to fiddly to set up. With these masks I shoot wide open at f/1.8. They do produce strong vignetting (see sample images) but I find them very much usable.
The prints shown in the gallery were done on a Prusa MK3.5 using Prusament PLA Galaxy Black, 0.2mm layer height, and the speed profile. The thin walls give it a bit of flexibility for a light friction fit but if handled too rough they may break, although so far with normal use I haven't had any of them fail.