SV08 Filament Sensor Holder (Spool side mounted)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple and minimal holder for the filament sensor of the Sovol SV08
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple and minimal holder for the filament sensor of the Sovol SV08, for when you mount your spool holder on the side.
BOM (with linked examples):
--> 1 x M3x8mm Hex socket screws
Link: https://shorturl.at/d6Tjc (Set of different sizes)
--> The 2 screws from the original sensor holder
Printing:
(These are my settings. That doesn't mean they are perfect for everyone and every printer):
--> Printer: P1S
--> Material: PLA
--> Preset: 0.16 Optimal
Adjusted
--> infill: 15% cubic
--> support: Yes, tree on build plate)
--> walls: 3
--> top: 4 (adjust top shell thickness accordingly)
--> bottom: 4
--> I would recommend printing the holder on the smaller flat side (the mounting side for the filament sensor) because the angle is less acute in this orientation.
If you have any feedback or question, let me know.
And you are welcome to rate the model.
Have fun printing!