The last ronin hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The last ronin hueforge
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 47
- Makes
- 1
- Views
- 368
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Project: the last ronin.hfp
Project: the last ronin.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.32mm
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 2.4mm and the Actual Depth is 2.4mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Prusament Lipstick Red Transmission Distance: 3.3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA Prusament Risotto Pigment Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.8mm) swap to Lipstick Red
At layer #9 (1.28mm) swap to Ash Gray
At layer #15 (2mm) swap to Risotto Pigment for the rest.