244 models
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…
Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…
This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.
Ironing Flow Test model for testing 10% thru 60% flow in 10% steps
Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…
Modified Orca Slicer settings for my Neptune 3 Pro and added graph scale markers.
Please consider Liking this model :) Ironing test Each rectangle has different ironing settings. Pick the one that suits you the best :) Originally designed for my SV08 but you should be able to adjust it to your printer
These models are designed to test ironing flow and speed. They are optimized for 0.2mm and 0.16 layer heights. Models test the flow rates of 10%, 15% or 20% through the speeds of 10-40mm/s. The sliced files are for a Bambu X1C. Just load…
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…
The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…
Better print in PETG with increased walls and infill
UPDATE: 06.03.2026~ I have uploaded .3mf files saved in Orca Slicer and Prusa Slicer separately as it seems not every one of them is compatible when opening the .3mf saved in different slicer. Hope this will help ya guys. UPDATE:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…
Ronin - Japan 2d Wall art, simple but very nice print
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
DEVTAC Inspired Ronin ballistic helmet Enjoy Category: 3D Printing
Ironing test with guide + connected.
FULL INSTRUCTIONS: https://randotechnerd.com/clear-petg This is only the settings for a 0.6mm nozzle single tile. Use the .3mf for settings the stl is just a 20x20x4 cube (images here are of this size). Original video 22x22x6mm for the…
Guide - How to perfect your Ironing on PrusaSlicer This is my own Guide of the Ironing Test by NuggetsINC on MakerWorld, but ready for Prusa Slicer 2.9.4 A very simple and detailed guide to test and understand how different ironing…
🧙♂ Want the full The Legendary 47 Ronin set? If you like this model, you can get the entire collection here : 👉 https://www.kickstarter.com/projects/arcaminis/the-legendary-47-samurai-ronin-stl-miniatures?ref=6kkqpn 🎁 Free Ronin Samurai…
Monotonic infill & ironing test Testfile for the new features of Prusaslicer 2.3.0 alpha 1 https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.0-alpha1 Print instructions gcode 1: monotonic infill test gcode 2: monotonic…
Replacement iron-on beads with 10 mm diameter. These do not need much filament and are great to print the very last bit of a spool. Tip: In Cura set “Print Sequence” to “One at a Time” and print til there is no filament left.
This tests ironing flow rates, 5%-25%, this was created with Orca Slicer 2.3.2 Feel free to change settings to your liking
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Red Ronin Full Armor Set, Everything is included except the GUN 1.- Sizing - The suit will need to be sized for your needs as it is roughly sized to fit a Average male around 6 foot, I recommend Armorsmith by The Armored Garage for…
Check if every single part have different ironing settings in slicer. Use brim to get everything attached. In X axis you have different speeds In Y axis you have different flow rate Check which one looks the best :) Edit: values are not…
This model includes axis labels for speed (mm/s) and flow rate (%) to the original model. The grid layout was also switched to align with the conventional x-y axes on a graph. Note that the axes add about 30 minutes to the print, but the…
Quick & Simple Ironing Test Square to really hone in those settings!
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
The diameter of the board leg is 19 millimeters, so the shelf is 20 millimeters wide. The angle of inclination of the legs relative to each other is 66 degrees.
I made ironing test and ironing flow adjustment models, a single plate contains round hole test, flat slope ironing test, and curved slope ironing test, depending on settings,a single plate should take 2 - 3g of filament, a single plate…
Bring the spirit of ancient Japan to your collection with this highly detailed Ronin Samurai Statue STL file. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and…
Get your ironing board off the floor - perhaps on the back of a closet door as I did with this approach. I looked at the various brackets others shared but thought I would like something a little different. Some others depend a bit more…
This is a replacement Arca Swiss camera plate for a DJI Ronin Gimbal. I have a Ronin-SC2 and this plate works great. This part should work with the DJI RS 4, RS 4 Pro, RS 2, RSC 2, RS 3, RS 3 Pro and Ronin-S, although it has only been…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Description: This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full matrix of ironing flow (10–30%) and…
I wanted to share the GCODE for the two cubes I printed as an example of the new ironing feature coming to PrusaSlicer 2.30. These are both the same model one is sliced with Ironing turned on, the other without. Print them both and enjoy…
All you have to do is insert the filament you are using et Voila ! testing speed and extrusion for ironing
Quick Practical print to hold the ironing board against the wall to stop it jumping on me in the dark. shared the model to keep these attackers at bay.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Dark Grey Transmission Distance: 2 PLA Gray Transmission Distance: 1 PLA White Transmission Distance:…
Description: This ironing calibration test is designed specifically for the Creality Ender 3 KE to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a…
Unite holiday cheer and martial honor with this unique Santa Samurai miniature! This highly detailed 3D model depicts a legendary warrior who blends the spirit of giving with the discipline of the samurai. Clad in traditional armor and…
Adding ironing to the top of models is a great way to give a better appearance. But what's the best spacing for ironing? Is the default 0.1mm optimized or can the same results be achieved faster with more spacing? At what point does…
This is an extension arm designed to fasten to one of the M4 mounts on the DJI Ronin S. There are two parts: a bracket and an arm. The bracket fastens to the M4 mount and then allows the arm to slide snugly into place so that it doesn't…
Case designed for the Rockpro64 board, can house up to 2 SSDs Designed by @MustyDuster & @Crazyk031 Modifications made by @mathiaspl20
The 5x5 grid consists of 25 individual parts (10 mm radius, 5 mm pitch). The platform can be deleted and replaced with a custom part (this platform has 1.6 mm thickness). This version is configured for Prusament PLA+ using a standard…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
We were having trouble sourcing replacement lens support brackets for the DJI Ronin-S / DJI Ronin-SC , so we made some. DJI has started manufacturing their own using plastic anyway ; ) Enjoy! Print Settings Supports: No Resolution: 0.15…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Foot for Ironing board fits 20x30mm pipes. Designed as replacement part for Kärcher Bügelbrett. print settings: Best printed on the large flat side. Depending on tolerances and the ironing board the fight mit bit really tight. Scaling it…
Wall hanger for an ironing board with curved legs. Use four 6mmx50mm half round head screws. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 4 Top layers: 4 layers Bottom layers: 4 layers Infill: 25% Supports: no (if you…
This is a remix of one from https://www.thingiverse.com/thing:4232886 I was asked to make one with pinholes in it. Category: DIY
With this adapter printed, you need to buy the Vmount Battery Plate 2987 from Smallrig. This adapter is made by MIAOUPROD, a french movie production company. PLEASE TAG ON SOCIAL MEDIA
I made this logo for my sons "Eredivisie football club logo collection". Made in Tinkercad from a picture of the logo. Print Instructions Print in 0.2mm layers, and change color every 4 layers.
My Process: I draw a 2D profile in NanoCAD (Free NanoCAD 5 non 3D capability). I export the file as a DXF and upload it to Fusion 360 (Free Version, still learning how to use) where I extrude add chamfers, fillets creating a 3D File.…
Description: This ironing calibration test is designed specifically for the Creality K1 to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full…
If you bought a IKEA Ruter Ironing board you are probably wondering where the heck you should put it. I live in a small house, therefore floor space is gold, which prompted me to make this super simple wall hanger for the Ruter board. I…
Wanted to create an ironing test that could be utilized beyond just the test itself to avoid being left with plastic scraps when done. This test print can double as a large drink coaster or keep it to use as a reference for your selected…
Dji Ronins come with left and right mounting points for handles, lights, mics, etc but no cold shoes. This part is the simplest print you can use to have a cold shoe on your Ronin.
Replacement clip for the IKEA DÄNKA ironing board, as the original snapped. Designed and printed within 1 hour!
Ronin Samurai Kneeling Statue
Imprimir con un material resistente a la interperie como petg Se probo con boquilla 0.4 a altura de capa de .20, 5 paredes, relleno giroide conectado al 40%, .8 de grosor superior e inferior y soportes Variante del modelo para maquinar en…
DJI Ronin-SC gimbal mounting point extension plate. Gimbal fastening with 2x M3 screws. NATO rail holds in one M5 screw which has a bold on this plate. And second point is 1 / 4-20 screw directly to original ronin-sc plate adapter for…
Enhance your DJI Ronin SC2 setup with this precisely engineered STL adapter, crafted to seamlessly connect to the gimbal’s NATO mount. This versatile accessory is perfect for mounting an array of cold shoe-based gear, including compact…
Holder for the rods on the ironing board. Link to the post .
This is a 3D Print designed to test your ironing settings. :)
EN: Just a simple Hook. I used it form my Ironing board. Space between Wall and inner wall of hook is 35mm DE: Nur ein einfacher Haken für mein Bügelbrett. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,22mm Infill:…
Drop Dead Fred - Elizabeth Cronin (Phoebe Cates) & Fred (Rik Mayall) - 1991 3D printable model.
Story: I bought a AquaPur ironing desk which occur to have plastic slippery foots on it, that would cause the board to bend quite bad during ironing. I got my first spool of TPU at that time so I decided to copy that foot and get my board…
Pla friendly model. Recommended to print with 0.12-0.16 mm layer, supports on (tree supports ideal). Best result at larger size and slower printing. Material: PLA Layer height: 0.12-0.16 mm (for detail) Nozzle: 0.4 mm Temperature: 200-210…
Just the Roblox hours Ronin drifters katana for Easy13 just for fun :)
just for hang on a wall ;)
Description: This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full matrix of ironing flow (10–30%) and…
Uses standard M8x10mm screws as counterweights, I used the low profile variant that weighs in at around 7 grams each for a variable weight of 49 grams. The prints, two threaded M5 inserts, and two M5x25mm screws add another 31 grams for a…
A clip that holds the ironing board folded. It is a replica of the original from IKEA DÄNKA ironing table.
A foot of my mothers ironing board wore up so I designed a new one. The size of the strut going in the foot is ca. 20mm x 30mm The angle to the floor is 55° F3D file is attached as well.
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US This is a replacement plate for the ronin thumb controller. WILL REQUIRE EXTRA PARTS TO ATTACH Parts Needed 25mm Rod Clamp Mount:…
A simple wall hook for hanging your ironing board on the wall. The diameter of the leg of my board is 35mm.
Semi oval shape protective feet for e.g. ironing board. Pipe dimention ~18.3 mm . Angled wall so it catch it good. Big stand area but also big angled stand area (wider). I have printed in draft mode for speed. Change to more precise if…
Introducing the Better Danka Clip, a durable replacement for the Ikea Danka Ironing Board's leg clip. Designed for a firmer hold and increased stability, this clip ensures your ironing board stays securely folded. Easy to install and 3D…
It can hold 300 ml (10 oz) of water. Height 95 mm. To be printed in vase mode. I used 0.6 mm nozzle and 0.7 mm extrusion width. Tried only with cheap PETG and it is much more sturdy than expected. I made one larger version, but then it…
Project: the last ronin.hfp Project: the last ronin.hfp Print at 100% infill with a layer height of 0.12mm with a base layer of 0.32mm You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2.4mm and the…
Eine Adaptionsplatte für das DJI Ronin SC, anstatt des Akkus. Es kann verwendet werden, um das Ronin SC an eine fixe Position zu hängen ohne zu schrauben. Eine Fusion 360 Datei kann man auch herunterladen, um den Halter für seinen…
Phone holder adapter for DJI ronin SC. Designed for the stock phone holder to screw into the mounting plate on the Gimbal. I have not 3D printed this, I made this on a manual mill with aluminum and modeled it after my creation. If you…
Feet for the DJI Ronin that allow it to stand on the ground firmly. Use M5 bolts and nuts to clamp the top to the bottom. Print instructions Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 20%
Replacement Ironing Board Leg Cap -If it does not fit, just resize the object. Category: Replacement Parts
I bought the TS100/TS101 soldering iron heating bit from Aliexpress and wanted to put it in FrostyTheClownMan's case. So I made this holder to replace the slimmer soldering bit. It has a 5x1mm magnet inside that sticks to the original…
Wall mount for DJI S, DJI RS 2, DJI RSC 2, DJI RS 3 / Pro
Ged rid of any fly at any time , with minimum force and maximum agression ;) If done like this this thing almost never breaks: - use PLA basic! - use ironing at the fornt (included in default print profile) As always completly open source…
Are you making Wuguigui's amazing Teenage Mutant Ninja Turtle kit, but want to do something a little different? Then I have something for you! Using the weapons provided in Wuguigui's Kit, I created a tonfa and Leonardo's broken sword.…
the hardest one to make yet, but overall it is possible to print
This is from Roblox and from one of the bosses if you would like to check the game its called Hours if you can't find the game here is a link: https://www.roblox.com/games/5732973455/HOURS (this is the game) This is my first ever…
The crush ribs mean if the end is not that round or your printer is out of tolerance it won't matter too much. I printed it in PLA, other hard plastics would work fine. No supports were needed on my prusa mini.
Ive always struggled with tuning my ironing flow. when i do a ironing test print, it looks perfect, but when i print out something else, my ironing looks rubish. this design replicates almost all situations where ironing would expect to…
![Holder for the rods on ironing board [Držák na nohy žehlícího prkna]](https://media.printables.com/media/prints/243051/images/2193443_e6d4406e-cee5-4015-941e-fab92804dc77/39_9.jpg)
