DJI Ronin S Cold Shoe Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an extension arm designed to fasten to one of the M4 mounts on the DJI Ronin S. There are two parts: a bracket…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 125
- Makes
- 0
- Views
- 1,093
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is an extension arm designed to fasten to one of the M4 mounts on the DJI Ronin S. There are two parts: a bracket and an arm.
The bracket fastens to the M4 mount and then allows the arm to slide snugly into place so that it doesn't move or come loose during a shoot. In this way, you can dismantle it and fit it into the case provided by DJI without needing to remove the bracket's screws. At the end of the arm is a groove designed to fit a standard cold shoe with a 3/4-inch screw (tripod screw). In the images provided, I've used this along with a standard ball-joint attachment to hold an Atomos Ninja V, which works quite nicely.
Print Settings
Printer Brand:
Dremel Digilab
Printer:
3D45
Rafts:
No
Supports:
Yes
Infill:
75
Filament:
ESun PLA Pro
Black
Notes:
- Advise printing at 75% infill with a rigid filament like ABS or PLA Pro. Advise printing with grooves oriented vertically to avoid extraneous support structures.
Category: Camera