DJI Ronin S Cold Shoe Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extension arm designed to fasten to one of the M4 mounts on the DJI Ronin S. There are two parts: a bracket…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 1092
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is an extension arm designed to fasten to one of the M4 mounts on the DJI Ronin S. There are two parts: a bracket and an arm.
The bracket fastens to the M4 mount and then allows the arm to slide snugly into place so that it doesn't move or come loose during a shoot. In this way, you can dismantle it and fit it into the case provided by DJI without needing to remove the bracket's screws. At the end of the arm is a groove designed to fit a standard cold shoe with a 3/4-inch screw (tripod screw). In the images provided, I've used this along with a standard ball-joint attachment to hold an Atomos Ninja V, which works quite nicely.
Print Settings
Printer Brand:
Dremel Digilab
Printer:
3D45
Rafts:
No
Supports:
Yes
Infill:
75
Filament:
ESun PLA Pro
Black
Notes:
- Advise printing at 75% infill with a rigid filament like ABS or PLA Pro. Advise printing with grooves oriented vertically to avoid extraneous support structures.
Category: Camera