1 / 2
Perpendicular RPi PSU mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount an RPi on either end of a PSU.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Works with any of the very common 215x115x30mm platform PSUs, like the CUI VGS-350C, Meanwell LRS350, Mornsun LM350, and others.
The regular version has 35mm clearance from the bottom to the PSU for a total installed height of 123mm.
The a Low Profile version has 18mm clearance from the bottom to the PSU for a total installed height of 106mm.
It has nut pockets for 2.5mm nuts which are big enough for most screw heads if you want to use Female/Female standoffs. I have tested with 11mm standoffs.