Small Radius Gauges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small radius gauges designed for phone cases - repair or reverse engineering.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed to procure a set of small radius gauges to reverse engineer my phone case which fell apart. As I also did not want to get lost in the tool section for 6 hours browsing, I decided to make my own! These are 60mm long, 20mm at their widest, and ~12-13mm near the tips. Also included are outside radius on the opposite end.
NOTE
While this includes down to 1mm, to get that size correct for the outside radius measurement, you will need to use a 0.2mm nozzle.
A 0.4mm nozzle is absolutely fine down to the 2mm radius. I put this down to divisibility of line thickness to radius.
3mf Files for Bambu Studio and Orca - Orca is the preferred plate.