Lomograflok Instax Back Modified Focusing Screen Spacer for Speed Graphic
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.97 – €6.07 net (excluding VAT)
For file: Instax Speed Graphic Spacer 21_0.3mm_PLA_MK3S_3h59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.52 excluding VAT (range midpoint).
- Weight reported by the author
- 101 g
- Print time reported by the author
- 3.99 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a modified Lomograflok Back focusing screen spacer at 21.5 mm for a Speed Graphic with a Fresnel ground glass.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 115
- Makes
- 1
- Views
- 1,628
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a modified version of the standard 19.5 mm ground glass spacer that comes with the Lomograflok Instax Wide Film Back. This should allow you to achieve sharp focus at wide apertures with a Speed Graphic that has a Fresnel focusing screen. I have tested this at f2.5 with a 178mm Aero Ektar lens and able to achieve sharp focus. The spacer thickness is 21.5 mm.
I know it works for my Instax Wide Film Back, but I have not tested it on other backs.
Recommended Print Settings: 0.3 mm layer height with a 0.4 mm nozzle. Infill 15%. Brim necessary.