Parametric Corner Bracket (suitable for FT EMS PSU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A parametric corner bracket made with OpenScad with two slots, initially made to install my PSU on FT EMS grid.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
I really like the concept of the FT EMS.
I wanted to be able to attach / detach my Meanwell LRS-200-24 without needing to disassemble all the FT EMS Grid, and not be obliged to install it before attaching the FT EMS to the frame.
So I designed very simple corner brackets to attach my power supply after the grids are in place. I made them with OpenScad, so that anyone can adapt to fit their needs. All is required is to adjust the variables, and regenerate a STL.
The all purpose size is 40x30 but may be a little massive. For my personal layout, 22x20 and 25x25 where fine.
I printed my bracket corners with external tree supports to have a good finish on the horizontal slots.
To install them on the grid, I used A-Mounts with heated inserts I slided under the grid and 12mm hexagons as temporary stand-offs.