1 / 10
Simple Cooling Duct for Kingroon KP3S V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cooling duct for Kingroon KP3S V2. Use original screws to tap threads. Orca Project File + earlier version included.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Cooling duct to replace the original that melted on me.
Installation
The screw holes are hexagonal. You can use the screws from the duct to form thread into them. My strat is to start digging it in one or two turns, then wiggle back and forth until you feel the plastic softening up from the friction. Two wiggles per proper crank, and you should end up with perfect round threads.
Maybe loosen the fan screws inside the shroud if the fit is too tight.