1 / 6
Qidi X-Max3 Reducer Vent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reducer and template for 120mm Fan to 100mm vent tube
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark where to cut the rear panel. No fumes inside now.
P.S. the screw holes line up with the Fan holes ,so you can use PC fan long thread mounting screws and they will hold the reducer and fan, I used some gasket RTV to seal the reducer to the printer panel also.