1 / 4
Simple Compound Bow and Arrow Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print and install Wall Mounts for Compound Bow and Arrows
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 83
- Makes
- 0
- Views
- 942
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple compound bow and Arrow wall mounts.
The arrow mount fits 10 of them.
The first bow support holds the weight of the bow on the cable rod and the second support , which it's slightly longer, simply holds the bow from the limb.
In my case I could do both supports with the first type.
Screws needed (all Countersunk):
- 2x M3x16 for the Bow Mount 1
- 1x M3x16 for the Bow Mount 2
- 4x M3x16 for the Arrow Mount
You might have to redrill the arrows holes, depending of your printer they might come out a little tight. (nominal diameter in 3D model: ⌀8.5mm, my arrows: ~⌀7.85mm)