Counting matching models…
This model is a remix that adds a couple features. Three version are available. One with a deer silhouette, original, and deer silhouette with peg for holding your bow release. The hanger will hold over 25lbs. Happy printing
This is a printable replacement magazine built mainly for the Diana, but it also has notches for the Worker Nightingale, and the Firerat (untested, also an uncommon blaster). It gravity drops from the Diana, but not the Nightingale. These…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
V 6.5 of my 3d printed Tactical compound crossbow. <disclaimer> I am not a 3d designer. I can not use cad. I am a trained mechanical drafter,…ON PAPER. Yes I'm old enough that we didn't have CAD when I was in school. This means I'm a…
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
Printed successfully! Tolerances are ok, M5 screws work without cutting threats. Added initials as a speziell touch. Hardware used: 1x M5 15mm flathead screw 1x M5 Washer 1x M5 selflocking nut 2x M5 Hexscrews aprox. 15mm 2x M5x15 Hexnut…
Tree ornaments made from the Regular Polyhedral Compounds These are: Compound of Five Cubes Compound of Two Tetrahedra Compound of Five Tetrahedra Compound of Ten Tetrahedra Compound of Five Octahedra These are provided as whole models,…
This is a simple wrist sling for all kind of bows. Create a unique paracord strap and sling it through. I used a washer between it and the stabilizer to prevent turning when you screw it on. Printed in TPU for maximal endurance with 100%…
A bodkin and blunt tip arrowhead for use with the Miniature Compound Bow by DonStick3l ( https://www.thingiverse.com/thing:2764962 ). Its not a true remix, the only thing I used from the bow was the aperature size for the arrow holder but…
Caution: this is meant for a child's bow and I consider it good for light duty only. A first design just for prototyping and easy target days. I printed the 7mm shorter version. The fit was just a little loose, so I put a single layer of…
Compound of Five Cubes , generated in Haskell. Sourcecode available on my website, here . Discussed in this blogpost . Can print in one piece, or split down the middle.
Planetary gear set has a sun but this gear set is without a sun. Also, it has double plannet(s). One ring is fixed while the other is the output. Motor rotates the planet(s) around the common center of the rings. There could be a single…
🔹 Description This is a 3D-printable toy crossbow pistol that uses a slide-cocking mechanism to arm the string. Racking the slide tensions the limbs and cams, making it easy to cock with one hand while keeping the mechanism compact and…
It's well known that one of the main problems in slingshot shooting, posture aside, is properly releasing the pouch. Small asymmetries in the attachment and awkward movements of the thumb and forefinger cause inaccuracy and poor…
a compound polyhedron Category: Math
A beautiful composition of a rhombic dodecahedron and a rhombic triacontahedron based on the sculpture Dos Mons by Josep Rey Nadal. Proof that the edges of the rhombic dodecahedron are coplanar to the faces of the rhombic triacontahedron:…
Part holds a dial indicator on BXA sized tool posts. This allows the user to set the compound to the exact right angle to follow a tapered part for reproduction of that angle. This could be for a morse taper, R8 taper, or some other…
Repose-arc à poulie en design bi-color (pas de double extrusion nécessaire) Branche noires imprimées en PETG, décorations, tenon et patin de fixation rouges en PLA Il faut prévoir une vis à tête creuse hexagonale ainsi qu'un contre-écrou…
I designed this pulley wheel for a cosplay prop, so I don't know, if it would be suitable for real use (I doubt it, since it is printed in two parts). It's based on the bow Arrow uses in season 5 of the show. For one wheel you need to…
The Bakos Compound is is a polyhedron compound of four cubes with octahedral symmetry. It can be printed as a 4-color print, but this would take over 40 hours on a Bambu X1C. Instead, I print each color separately. Color 1 (black, in the…
For remote cooling solutions This will not increase the fluid flow rate but will increase the static pressure this system will be able to produce. Compatible with 5015 silencer Installation You will need: Appropiatly sized screws in…
I made a little organizer for my polishing paste and few felt/wool polishing discs tha ti use with it specifically 3 2-inch ones and another 3 3-inch ones and with space for a little jar that I use for a burnishing compound. #Maybe…
Just a simple compound bow and Arrow wall mounts. The arrow mount fits 10 of them. The first bow support holds the weight of the bow on the cable rod and the second support , which it's slightly longer, simply holds the bow from the limb.…
This is my first remake/model - Created in Fusion360. Remixed with the Intermediate wet tire compound, optimised for printing with a solid base so you can use it as stand alone or on a base. Scaled to match the Slicks & Wets. Printer:…
The Rolling Compound of Eight Octahedra is an angular shape inspired by the oloid, rolling in a straight path while wobbling in an S-shaped motion. Built with precise 90° angles, it creates an optical illusion from certain angles, almost…
This hold 6 Easton 400 FMJ arrows. The diameter of those arrows are 0.263". This should fit your standard cheapie quick detachable quiver on the market. I included a picture of the old one vs the new. Print it in TPU.
3D Printable Kick Stand for Compound Bows! Keep your compound bow safe and secure with our lightweight, durable 3D printable kick stand. Designed for easy printing and portability, this stand provides stable support for your bow, whether…
Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter 32mm ID /41mm OD ShopVac Vacuum Adapter to Makita LS Sliding Compound Mitre Saw Compatible Model: LS1219 LS1019 LS003GM102
squadretta compound - per dimare perpendicolarità freccia-corda
A compound bow square to help tuning notch point height and arrow rest position.
This page provides a few replacement parts for the Ultimate Foraging Wheel found at https://www.printables.com/model/1158725-ultimate-foraging-wheel-for-rats I wanted the wheel to be quicker and easier to refill, so I replaced the star…
This 3D model represents a compound of a cube and an octahedron , inspired by a shape I discovered in a Wikipedia article. The geometric interplay between the two forms creates an elegant symmetry. The model prints easily without…
small into big, works well to mitigate vibration
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
This is Level 2 of the Mosely Cube Octahedron Compound Fractal, a fresh take on the classic Mosely Snowflake Fractal. Instead of using standard cubes, this version is built from cube-octahedron compounds, adding new depth and complexity…
This assembly is used to help set the center shot on a compound bow. To complete this assembly the following is needed: Hardware: 4 - 10-24 countersunk head x 1.5" in length 2 - M6 Washers 1 - M6 Nylock Nut 2 - M6 Standard Nuts 2 - 10-24…
This clamps on to the bow limbs and holds the bow upright. Can be used in different positions on the limb depending on bow config to keep it upright. Instructions Print out 2 pieces then bolt together with M8 hardware. The other two…
Picatinny Rail for PSE Compound Bows Shootdown (2018 model) and Mach 33 to mount things like MantisX or other. Mount it ot Shootdown with M4 nut and screw. Don't overtighten. Mount it to Mach33 with 10-24 screws (like sights use).
Added a catch notch for smiley on the mag and increased clearance in the breech for better dart fit instead of the really tight one from silly
Fits Michael's 4x6 photo box to organize the ionic compound learning aid sets.
1x1 Gridfinity bins for Tamiya Modeling Putty and Polishing compound. There are 2 different size models. The model for the Tamiya polishing compound has a slightly larger cutout for the deeper and larger cap. I use these on pegboard…
This model is designed to show how ionic compounds such as sodium chloride dissolve in water. The sodium (orange) ions, chlorine (green) ions, and water molecules are all to scale. The bulk crystal is face centered cubic. Separate ions…
This is a bow rest that I use for my drop away on a compound bow. It is fitted to my arrow, so make sure that you get it the way you need it!! I used a special double sided kind of tape for mine. You can glue yours if you want!! Be carful…
This remix allows you to replace the normal Compound Mag follower with one that has a rubber stopper. This prevents the return of the pusher when priming a shot, giving a tactile notification of being out of ammo and preventing…
This is a bow press that I modeled and have not built. It uses a standard 8mm lead screw, nut, and a skate bearing. There are some purchased parts as well as a couple 3d printed parts. Welding would be required to build this. The steel…
Stand for a compound bow with split limbs (with a 22+mm gap) like a Mission Switch. Inspired by https://www.thingiverse.com/thing:6541994 Designed to be printed with a TPU filament (photo: 0,8 mm nozzle, 0.5 mm layers).
This is a compound of a cuboctahedron and a rhombic dodecahedron, modeled in CAD as the base shape for a new fractal series I'm releasing . I’ve included the 3MF file for the exact print shown in the photos. That one was printed on a…
This is Level 1 of a new fractal series I’m developing, built from a compound of a cuboctahedron and a rhombic dodecahedron . I designed it in CAD to explore geometric recursion and symmetry. This is the first step in a larger…
This compound planetary gearhead is an anti-backlash version of my earlier Robot Actuator (smallest version): https://www.thingiverse.com/thing:3293562 It has about 50% more torque, significantly less backlash, and also runs more…
I couldn't find a reasonable adapter online, so I made this one. It should be printed in place without supports using PETG in the photos. I used 30% hexagonal infill, but less might do. You may be able to increase the miter-side clamping…
Made this to connect the bag adapter on a Dewalt Mitre Saw. Pop the bag off the adapter, slide this on and connect a 2.25" hose. Done.
[HYP] COMPOUND BOW MOUNT THICK A WALL MOUNT FOR YOUR COMPOUND BOW, ► PRINT THE MODEL LYING SIDEWAYS. ► USE 4 OR MORE WALLS/PERIMETERS ► USE SAME NUMBER OF WALLS AS TOP AND BOTTOM LAYERS ► RECOMMENDED TO USE PETG/ABS OR ANYTHING TOUGHER ►…
[HYP] COMPOUND BOW MOUNT SLIM A WALL MOUNT FOR YOUR COMPOUND BOW, ► PRINT THE MODEL LYING SIDEWAYS. ► USE 4 OR MORE WALLS/PERIMETERS ► USE SAME NUMBER OF WALLS AS TOP AND BOTTOM LAYERS ► RECOMMENDED TO USE PETG/ABS OR ANYTHING TOUGHER ►…
Compound Angle Tool Post Dial Indicator Holder. Mounts to a lathe compound angle tool post to hold a dial indicator. This removes all the backlash when using the compound angle tool post. Dial indicators with a .375" mounting stem work…
80 tooth gear attached to a 16 tooth gear with washers below each gear (apart from the base)
This is a 3x1 Gridfinity storage box that will hold a 1g Thermal Grizzly tube and an 8g MX-4 tube. (along with space for two nozzles).
This is Chrono-Ranger's Compounded Bow from Sentinels of the Multiverse (copyright Greater Than Games). Technically it isn't so much an item as it is a part of Chrono-Ranger, being a form that his mechanical arm can take, but it's just…
I created this model in CAD while exploring the concept of duality between n-gonal prisms and their corresponding dipyramids. Special thanks to George W. Hart for providing such an incredible resource for learning about polyhedra and…
This 3d model represents the hyperbolic variation of the cube-octahedron compound. The geometry can be split into two mirrored halves for easy, support-free printing. Print Settings (I Used the Bambu Lab P1P): Nozzle: 0.4 mm Layer Height:…
Since wheels for the micro RS4 seem to be discontinued, I created some basic wheels that fit the HPI D Compound soft rubber tires. There is a center block support so that the tire foam stickers do not need to be used. Printed on Prusa…
This is an experiment to improve my hunting bow that I'm happy to share with you all Profile 2 is for smaller hands Profile 3 is for bigger hands in order to guarantee more room for managing the bow (see pics for different profile)
This sliding stop will make repetitive cuts a breeze. HOWEVER cutting any short timber on a sliding compound mitre saw requires care and comes with increased risks. Please ensure you are aware of the operational risks before attempting to…
A fun print in place fidget toy that demonstrates the true power of gears to increase speed or torque. This is achieve by combining small spur gears with larger spur gears into compound gears. This download includes 2 different systems,…
Multi-stage compound gearbox with sequential gear reduction. The input gear with a radius of 4.75 mm drives the first compound gear with a radius of 14.75 mm on one side. Check out my app: app Each intermediate gear is a single solid part…
🔹 Description This is a 3D-printable toy crossbow pistol that uses a slide-cocking mechanism to arm the string. Racking the slide tensions the limbs and cams, making it easy to cock with one hand while keeping the mechanism compact and…
It's well known that one of the main problems in slingshot shooting, posture aside, is properly releasing the pouch. Small asymmetries in the attachment and awkward movements of the thumb and forefinger cause inaccuracy and poor…
a compound polyhedron Category: Math
A beautiful composition of a rhombic dodecahedron and a rhombic triacontahedron based on the sculpture Dos Mons by Josep Rey Nadal. Proof that the edges of the rhombic dodecahedron are coplanar to the faces of the rhombic triacontahedron:…
Not yet finished, ultimately the OpenSCAD model will be published and customizable on Thingiverse. Here's a video of the thing in operation (gear ratio is -2209.85 to 1): https://youtu.be/GvXuM1YQFO8 Based on designs and lessons from GDFW…
This is a compound bow stand with rubber sleeves/protection, for solid limbs. (In my case, a Diamond Medalist 38. Which has limbs 37mm wide, and 8-10mm thick). Print a right and a left leg, and two rubber sleeves. Four versions of the…
This is a design for a replacement insert for a DELTA 36-220 10-Inch Compound Miter saw. Print it with a fairly high infill, no support required, then screw it into the saw and with the saw running slowly lower the blade to cut the…
As a learning exercise I designed and printed this insert for my Delta miter saw. It fits really well, I only slightly had to drill out the small holes, but otherwise it fits like a glove. I printed this in PLA, 0.2mm layer height, 50%…
If you know, you know. That polishing compound is expensive , so I made this to make getting every last drop easier. I changed it because it was too slow. It is also bidirectional now. Printed on Core One in Prusament PETG: Satin sheet.…
Makita LS0815F Slide Compound Miter Saw To C35 Bosch Female Dust Collector Adapter I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
Replacement kerf board / blade guard for Mikita LS1214 12” SLIDE COMPOUND SAW. Part number 415209-5. Need at least 300x300 build plate to fit it. Category: Replacement Parts
2020_04_07 --Once upon a time, possibly in the 1890s, someone mentioned this type of engine in an early edition of Model Engineer magazine. 40 years ago Elmer Verburg designed a miniature version of that single cylinder compound steam…
This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…
Sight hood for Topoint TP8710 scope (will probably fit any compound scope with 35mm detachable screw lens)
Triangle pins hold the two halves together. The holes (the circular ones) should be on the same side so that they line up. The caps help keep the gears on the pegs.
This is a simple cam for a toy compound bow I designed just with some photoes of real cams Category: Sport & Outdoors
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…
Part holds a dial indicator on BXA sized tool posts. This allows the user to set the compound to the exact right angle to follow a tapered part for reproduction of that angle. This could be for a morse taper, R8 taper, or some other…
This model provides a replacement for a broken or missing motor cover on a Delta Compound Miter Saw. It works on model 36-075 and possibly others with similar shaped motor. I own this miter saw, and many years ago I broke off the plastic…
tool for setup right angle for arrow nocking point on compound bows
Holds 3@ arrows of diameter ~3.5-5.5mm (freecad file provided if your arrows are a different size). This is not really a remix, but an accessory for the Mini Compound Bow designed by DonStick3l... Don thanks for the wonderful design!:…
my compound planetary gearbox. 268.8 : 1 if you want to use your own motor you must make a new 'first stage sun gear' and 'motor holder'. for the sun gear: -10 teeth -module: 1.4 mm -pressure angle: 20 ° for the motor mount, the center of…
This is a quick and easy print to check printer axis calibration.
This is a driver for a 8" lathe's compound slide. It slides onto a 1/4" hex shanked 3/8" socket adapter. Then a drill or power screwdriver can turn the slide. It will work with ether on or two of the handles installed. I've been using it…
This model prints pretty well, however I found that if you want to have a good glue seam when combining the pieces to form the compound of dodecahedron and icosahedron it is worth sanding the edges on each side of the triangular pieces.…
Designed for mounting compound bows on Unistrut I print in PETG with 4 walls and found infill around 50% is good Print with the round part parallel to the build plate (not vertical) supports required Please test for yourself before…
Repose-arc à poulie en design bi-color (pas de double extrusion nécessaire) Branche noires imprimées en PETG, décorations, tenon et patin de fixation rouges en PLA Il faut prévoir une vis à tête creuse hexagonale ainsi qu'un contre-écrou…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
The lever on this saw stand had taken a beating and no longer worked. So I drew up a new one. Fits onto model DWX723.
![[HYP] COMPOUND BOW MOUNT THICK](https://media.printables.com/media/prints/d4fc90f1-5f0c-410f-83d6-95be71b61f6d/images/10088292_86276277-35b1-4511-aefe-928a334a5157_af1e722a-6c22-4031-8701-74f888c214c1/1.png)
![[HYP] COMPOUND BOW MOUNT SLIM](https://media.printables.com/media/prints/f24e47c6-6ae6-4d28-9caa-4d5c31755e1b/images/10088311_63fb0568-ad39-4d64-8592-bbb6a72e13a2_a15c56a1-1312-4b31-8428-21c734cf89e8/3.png)
