Super Hooks! - A Modular Kitchen and Closet Hanging System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Super Hooks! A customizable kitchen and closet hanging system. Mix and match parts to make your own hook system!
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 85
- Makes
- 1
- Views
- 590
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Super Hooks!
A customizable kitchen and closet hanging system.
Mix and match any of the following:
- Hook Type
- Small Hanger (Good for spoons and spatulas)
- Large Hanger (Good for scissors)
- Peg (Compatible with standard kitchen utensil hanging hole)
- Also comes in "short" variation
- Small Hanger (Good for spoons and spatulas)
End Type
- Left End
- Right End
- Center
Mounting
- Center Screw Hole
- No Screw Hole
Super Hooks were designed to not require supports when printing!
(Maximum overhang is -45° on 2-4 layers of the hanger pegs)
Recommended materials: ABS, PETG, PLA+/Pro PLA (any rigid, durable material)
Shells: 3+
Top layer: 3+
Bottom layer: 2+
Infill: 25%+ (for the pegs more than the base)
Print so that the pegs are pointing upward (if your slicer does not use Z-Up coordinates).
Mounting
Snap the parts together, glue, and finish if desired.
Obtain #8 drywall screws with drywall anchors.
Or, if securing your own screws:
- Screw diameter including threads: 4.3mm
- Head diameter: 7.8mm
- Head height: 3mm
- Screw length: 20mm or longer (mine are 35mm)