AllSky Pi Enclosure v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple AllSky Pi enclosure with PoE and SSD
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Simple AllSky Pi enclosure to cover a Pi 4 with a PoE hat, M12 HQ camera, and a 3.5" SSD.
Use this 90mm dome with side holes so that accessing the lens and focusing was easy. Pictures show 100mm dome, renders show 90mm dome.
I used this Waveshare 184.6° lens.
Put a small 12v 3010 blower fan (power from GPIO or USB) to direct heat into the dome to prevent dew. I use this Gdstime 12v dual ball I had on hand, running it at 5v keeps it quiet and extends the life of it.
And need to get a USB 3 to Sata adaptor and a 3.5" SSD, a decent SD card will work as long as you are offloading the files regularly.
For the seals I used TPU, just had to glue it in a bit more. Or you can purchase nitrile rubber which is a bit more flexible.
I got these to pass the ethernet cable though, but would recomend looking for something better. It's already falling apart.
I just used some super glue to attach the stars.
Hardware:
23 x M3 x 6mm
16 x M3 inserts (Voron spec, M3 x 5mm wide x 4mm deep)
1 x M3 Hex Nut
4 x M2.5 x 16mm
6 x M2 x 6mm