1 / 7
BIQU - H2 V2S - Fan Duct - Part Cooler - Rev.1 — image 1
1 / 7

BIQU - H2 V2S - Fan Duct - Part Cooler - Rev.1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

BTT (Big Tree Tech / BIQU ) Fan Duct / Part Cooler - Rev.1 H2 v2s

Rating
0 / 5
Likes
17
Downloads
86
Makes
0
Views
711
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

BIQU - H2 V2S - Fan Ducts

Printhead & Part-Cooler 
May fit other Makes / Models (H2 / Lite) 
Revision 1 
By: David Orlo 

Part Details

  • Dual 5020 Blower Fans:
  • Single shared duct that splits into Two Independent Printhead Ducts
  • Expected Improvements
  • Overall Print Quality
  • Less curling / warping
  • Ability to print faster
  • Print capabilities (overhangs, bridges, less supports)

Show Appreciation & Support

Want to support my work or get exclusive 3D content?

  • Individual Items for as low as $3 (Patreon)
  • Monthly Memberships with Benefits $3-$7 (Printables, but Patreon Membership in the works)
  • $5 Monthly Membership includes ALL Paid Content
  • Exclusive Content, 3D Models, Design Files & More
  • In-Depth Tutorial Videos covering Autodesk Tinkercad, MeshMixer & Microsoft 3D Builder (Editing)

Check out my Printables & Patreon shops!

Print Recommendations

  • Layer Height: .2
  • Infill: 90% +
  • Material: PETG / ABS / ASA / PLA +
  • Supports: Take the time to manually place supports to avoid any supports within the ductwork.
  • Brim: Highly recommended
  • Expectations: If your support settings are dialed in, it should work fine, but if you're using the stock setup, I suggest printing this twice.
    • The second print with the new duct will likely turn out much nicer, which is the whole point anyway, right.

Setup Recommendations

  • The small radial fan (BIQU Supplied) should run at 100% anytime voltage is applied to the hot end or anytime the printer is powered on—unless you enjoy clearing jams, of course.
  • recommend keeping the blower fans synchronized and controlling them together.
    Blower Fan Series Wiring Instructions
  • For a 12V printer, you could wire two 5V fans in series, but some fans may not appreciate the extra voltage at full power. A 24V printer could run two 12V fans in series.

Blower Fan Series Wiring Instructions
For a 12V printer, you could wire two 5V fans in series, but some fans may not appreciate the extra voltage at full power. A 24V printer could run two 12V fans in series.

  • Series Wiring:
    • Connect positive from Fan A to the printer mainboard.
    • Connect negative from Fan B to the printer mainboard.
    • Connect the remaining Fan A negative and Fan B positive fan wires together.

 

-

---


---
### Help Support & Keep My Work Free
https://www.youtube.com/@MeshMaster3D

 

PLEASE SUB - IT MATTERS A LOT
--

Tags