Z PROBE FOR HYPERCUBE (V2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is another simple autoleveling pasive mechanism for hypercube.These are parameters for Marlin config:Distance…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is another simple autoleveling pasive mechanism for hypercube.
These are parameters for Marlin config:
Distance from hotend: X = -41.5mm (41.5mm to left side) Y = 0
This thing was tested and is working fine. This is stronger than my before version.
Print Settings
Printer:
CORE XY
Rafts:
No
No
Resolution:
0,2mm
35%
Filament: --- PLA ---Post-Printing
ASSEMBLING:
You will have to use for assembling:
1 screw M3x50
2 nut M3
1 spring (14mm x 4mm). You can get it from a pen
1 magnet 9x2mm (Maybe you will need to add another one to increse the magnetic force)
1 microswitch 13x6mm
You will have to pass a drill of 3mm (and a little bit more) in order that the M3 screw pass through freely
The microswitch is connected in replacement of the original Z endstop
STEPS:
- Put the microswitch from top side. Glue it
- Assemble screw-nut-TOPE SENSOR-nut
- Put the magnet from the side to the pocket
- Calibrate the spring force, stretching it if necessary for activating the microswitch when the screw is down, and touching the magnet when the screw is up.
- Mount the assemble in the carriage.
Category: 3D Printer Parts