1 / 7
Rc F1 Boat With Outboard Mercury Racing 360 — image 1
1 / 7

Rc F1 Boat With Outboard Mercury Racing 360

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Rc F1 boat with real Outboard motor Mercury Racing 360,

Rating
0 / 5
Likes
106
Downloads
877
Makes
0
Views
5,581
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Build video https://youtu.be/SllnjgBfWdE?feature=shared
https://youtu.be/PSYab_l4kDQ?feature=shared
####Mercury Racing 360 Outboard Engine###

Outboard file link https://cults3d.com/:2254330


-This outboard has a height of 20cm
-Suitable for hulls above 70cm, I will make many hulls that fit this outboard Engine! so you can make lots of rc boats with just one engine
-I used a 3670 motor, this outboard can use motors up to 4076 (not tested yet). 
-this outboard can adjust trim position on mounting and and can be adjusted the height from hull
-gear lubricant hole for easier to fill the lubricant after playing
-easy to print without any support and pre orianted
-need 400grams of filament (pla) used abs for motor mounting
-have a great watercooling system

Print Setting:
-min print area = 200x140x50
-nozzle = 0.4
-layer hight = 0.15 lower is better for high quality
-perimater = 5 wall line
-top/bottom = 5
-infill = 30%
-support = no

BOM:
-bevel gear shaft 4mm 15t 0.8 2pcs ( https://a.aliexpress.com/_opczqfU )
-bearing 604zz 1 pcs ( https://a.aliexpress.com/_oCFW9Pv )
- bearing 684zz 5pcs ( https://a.aliexpress.com/_oCFW9Pv )
- shaft 4mm 30cm
- rigid couple joint 4x5 (depending on the motor you use) ( https://a.aliexpress.com/_oDoRGWb )
-drive dog 4mm ( https://a.aliexpress.com/_okQpmtp )
-propeller up to 50mm (i use 40mm diamter) (https://a.aliexpress.com/_olAepaR )
-brushless motor up to 4076 ( i used 3670 2150kv)
- heat insert m2.5 (2.5IDx3Lx3.5OD) 18pcs ( https://a.aliexpress.com/_olfvCxz )
- m2.5x5 18 pcs ( https://a.aliexpress.com/_oEKdBSR )
-m3 x35/40 2pcs with nut (for adjustable trim position)
-m2x3 self taping screw (for gear lubricant hole)
-push rod connector 2pcs for servo rod ( https://a.aliexpress.com/_olInPFh )

####F1 Hull PowerBoat####
-70cm length
-Nice desain and performance
-easy to build and print withoutsupport
-have a pin joint for each body to make easier to put it together
-need 1.300gram of pla

Print Setting:
-Min print area = 235x235x230
-nozzle = 0.4
-layer hight = 0.2 lower is better for high quality
-perimater = 2/3 wall line
-top/bottom = 4
-infill = 15%
-support = only servo mount

BOM
-m3x8mm 16pcs for battrey tray, esc tray, servo mount, and servo
-m3x25mm 4pcs and nut 4pcs for outboard mount
-m3x40mm 3pcs and nut 3pcs for cover 
-Push rod or stainless stell Leader Fishing wire for servo rod

Electronic that i used
-Battrey 2pcs lippo 2s 5000mah
-Esc Flycolor 150a
-Servo 25kg waterproof
-dumborg 6ch transmitter

3D PRINTING SETTINGS

3d printer fdm
-nozzle = 0.4
-layer hight = 0.2 lower is better for high quality
-perimater = 4 wall line
-top/bottom = 4
-infill = 30%
-support = no

Tags