Interdental brush cylindrical travel case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.96 – €1.17 net (excluding VAT)
For file: CE3V3SE_interdental_case_5mm.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.06 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.22 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cylindrical case designed to hold common interdental brushes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 67
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Coming soon: parametric model. If you need other sizes please feel free to contact me.
Disclaimer: photo belongs to the 10mm thread height variant.
Cylindrical case designed to hold common interdental brushes.
Features:
- Cylindrical so it matches common brush variants.
- Small openings at the bottom so moisture does not stay in the case.
- Hardened thread so it last longer.
- Grip marks for the cap.
- Tolerance added to most of the measures in the model (0.2mm) to soften printing errors.
- Two variants:
- 10mm thread height size
- 5mm thread height size (if you are a lazy twister)
Dimensions:
- Inner diameter: 13mm
- Inner height: 80mm
- Thread size: 10mm
- Outer diameter
- Thinner part: 15mm
- Thicker part: 16mm
Printing instructions:
Please feel free to use provided gcode. Otherwise:
- Quality (layer height): 0.2mm
- Infill: 15% (does not really matter as there are mostly walls).
- Wall count: 2 should be more than fine.
- Top/Bottom layers: 2 at least should do the trick as well.
- No support needed if printed as:
- Body: normal, standing on its base.
- Cap: standing upside down (i.e. standing on the top side)