1 / 2
Filament Sensor Mount - On Extruder - Remix (6 variations) New Updated version 2.0 — image 1
1 / 2

Filament Sensor Mount - On Extruder - Remix (6 variations) New Updated version 2.0

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament Runout Sensor Mount for Extruder. Remix includes upgraded, left angle, sloped mounts, short vertical options

Rating
0 / 5
Likes
7
Downloads
51
Makes
0
Views
424
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Newly Updated**

I took the amazing Ender 3 V3 KE Filament Sensor Mount provided by Flobi, and a remixed version from Efe Balum, for my purpose built custom 3d printer enclosure. 

I happened to have a need to not have the spool located on top of the ender 3, (relocated to a above shelf and below compartment if the 3d printer enclosures cabinet, where both are fed in from the left to the 3d printer, versus a straight shot down vertically. 

I have included 6 variations: (Updated 11/16/2024)

In the original Flobi was kind enough to provide the “base” (that holds the sensor) and Efe was kind enough to provide 2 different “heads” that allows PTFE tube connection or Push in/ through hole that might work also with PTFE tube. I opted to test and use with the PTFE tube connection, but keep in mind you will need a threaded PTFE tube connector if you use that head like I do.

My remixes include 3 newer bodies

  • A short vertical, on extruder mount, that is as short as I could make it, with the ability to attach a head to it from the original remix from Efe.
    • I also included a version with the PTFE connector tube head, already attached, so it could be printed in 1 go of it.
  • A 90 degree left angled, on extruder mount, that is short, and takes a sensor / filament from the left versus vertically.
    • I also included a version with the PTFE connector tube head, already attached, so it could be printed in 1 go of it.
  • NEW**
    • A 45 degree left angled, on extruder mount, that is short, and takes a sensor / filament from the left versus vertically (my specific use case). 
      • Has its own curved printed pipe to redirect filament to extruder
      • I also included a version with the PTFE connector tube head, already attached, so it could be printed in 1 go of it.

I hope this is helpful, and leave me a comment about your thoughts!

  • Chris

Tags