1 / 5
Ornament Star (Flat Print)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print star for christmas tree or any ornament
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 216
- Makes
- 3
- Views
- 766
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
With a 0.6 nozzle, this star prints up in 9 minutes and only 4g of filament.
Final assembled star is around 8cm in size.
No layer lines!
- This star prints flat to the surface. Keep the nice finish of the bottom of the print to the outside and it looks perfect.
- After printing, fold the star on the lines until you get the shape.
- The shape holds surprisingly well on its on for decoration purposes, but you can add some glue if you want to secure it.
Printing instructions:
- If you want it larger, scale only X and Y. Keep Z at 100% so the folds are still thin enough to bend.
- Use concentric bottom fill pattern for an even better finish and easier to fold.
- I printed with PLA with a 0.6 nozzle with 0.28 layer height but other configurations with 0.4 nozzle should work just as well.